Free shipping
Shipping within 24h
Competent advice
Purchase comfortable on invoice
+44 (0)1782 491 030
"Was ist neu?" Banner

New products

G-Fittings product innovations: Developed for you

For the continuous development of our products, we are in constant contact with our customers so that their needs can be directly incorporated into the development.

This results in further products, surfaces and solutions that meet the requirements of our customers.

We have compiled the most important product developments of the last few months for you here. Of course, your G-Fittings consultant is at your disposal for a personal discussion.

NEW
Sliding door for glass and wooden door Lena
Execution: for glass door
The LENA sliding door system is available in different versions from G-Fittings. It is suitable for easy mounting on the wall or on the ceiling. Choose between a classic wooden door or a glass door. Whether in the entrance area, in the living room, in the kitchen, in the bedroom or children's room - the complete sliding door set can be used in different living areas. Complete system for wall and ceiling mounting suitable for wooden or glass door suitable for 25 to 40 mm wood thickness suitable for 8 to 10.76 mm glass thickness Running rail made of aluminum (matt silver anodized) Aluminum track panel (height 82.5 mm) End stop including soft close Opening direction left or right Height adjustable ± 5 mm End caps optional Delivery consisting of: 1 running track 2 cover profiles 2 carriages with anti-jemmy protection 2 end stops incl. safety catch 1 floor guide 1 assembly key  

To order this product, please log in here.

New surface
VMP
Handrail Riwanja
Length: 2500 mm | Surface: Anthracite black design
The Riwanja handrail with curved end caps is supported by a handrail support at a 90° angle and is suitable for wall mounting. Secure your stairway or railing with the Riwanja handrail.

To order this product, please log in here.

NEW
Shower cubicle Louisa
Length: 1500 mm | Mounting type: Wall / Glass | Surface: Anthracite black design
Our LOUISA all-glass shower is suitable for ceiling, niche, corner and free-standing showers and is available in various surfaces, matt silver anodised, chrome or black design. The glass shower is characterized by its sliding door, regardless of whether it is installed in a corner, niche or ceiling. No glass processing such as drilling required, a high-quality damper system is optionally available. The shower has secure anti-jemmy protection, quick and easy installation and is height-adjustable +/- 3 mm. The innovative floor guide with magnet technology requires no drilling. The entire assembly is barrier-free, all components remain accessible and can be easily adjusted from the front. The all-glass shower is available for glass thicknesses of 8 mm and 8.76 mm.

To order this product, please log in here.

NEW
Shower cubicle Anna
Mounting type: Corner two-sided | Surface: Anthracite black design
The G-Fittings glass shower Anna offers the solutions for every bathroom, depending on the situation. The 2000 mm high glass shower profile is suitable for 6 mm glass. And can be used for mounting on shower trays or tile floors. Modular design allows numerous types of entry Swing doors open inwards and outwards with lifting/lowering mechanism (± 4mm) Adjustment range in the wall connection profile to compensate for any unevenness Standard door height 1976mm (wall connection profile 2000mm) Single-pane safety glass 6mm (optionally available) High-quality aluminium profile with different finishes Can be mounted on shower trays and tiled floors incl. assembly materials, stabilising components and seals Door handles optionally available

To order this product, please log in here.

NEW
VMP
Counter sneeze guard Paula
Width: 1000 mm
The panel consists of 6.38 mm laminated safety glass (VSG) and is scratch-resistant, crystal-clear, impact-resistant and of course splinter-free. With the supplied rubber-coated clamps in various surfaces such as matt grey, matt white or anthracite black, the window can be set up quickly and safely and can be expanded with additional elements as desired. The recess of the cough screen allows you to maintain safe, yet personal contact with your customers. By using the cough screen, you not only guarantee your employees high-quality protection against infections, but you also give your customers a feeling of safety. The cough guard is being mounted onto the desk with the help of the glass adapter Karlijn. Only glass provides effective protection Effective disinfection against Covid-19 is only possible on glass. Transparent plastics such as acrylic glass cannot withstand treatment with substances effective against the Covid-19 virus. Disinfection with the agents 62-71% ethanol and 0.1% sodium hypochlorite that are suitable for the control of the Covid-19 virus will damage these plastics. Cracks appear, which means that the minimum hygienic requirements can no longer be met. The glass protection of G fittings thus offers a durable, ecological and safe solution. Source: Journal of Hospital Infection, Volume 104, Number 3, March 2020 246-251 Your benefits at a glance Optimal solution for hygiene of customers and staff Extremely suitable for pharmacies, hotels, notaries, architects, shops, doctors' surgeries, hotels, cafes and restaurants For indoor and outdoor use (rust resistant) Scratch-free, crystal-clear, lightfast, shock-resistant and splinter-free Simple construction Different surfaces Easy to expand Other dimensions on request

To order this product, please log in here.

NEW
VMP
Counter sneeze guard Moni
Execution: with cut-out | Surface: Anthracite black design
The panel consists of 6.38 mm laminated safety glass (VSG) and is scratch-resistant, crystal-clear, impact-resistant and of course splinter-free. With the supplied rubber-coated clamps in various surfaces such as matt grey, matt white or anthracite black, the window can be set up quickly and safely and can be expanded with additional elements as desired. The recess of the cough screen allows you to maintain safe, yet personal contact with your customers. By using the cough screen, you not only guarantee your employees high-quality protection against infections, but you also give your customers a feeling of safety. The cough guard is being mounted onto the desk with the help of the mobile hygiene protection post Lina. Only glass provides effective protection Effective disinfection against Covid-19 is only possible on glass. Transparent plastics such as acrylic glass cannot withstand treatment with substances effective against the Covid-19 virus. Disinfection with the agents 62-71% ethanol and 0.1% sodium hypochlorite that are suitable for the control of the Covid-19 virus will damage these plastics. Cracks appear, which means that the minimum hygienic requirements can no longer be met. The glass protection of G fittings thus offers a durable, ecological and safe solution. Source: Journal of Hospital Infection, Volume 104, Number 3, March 2020 246-251 Your benefits at a glance Optimal solution for hygiene of customers and staff Extremely suitable for pharmacies, hotels, notaries, architects, shops, doctors' surgeries, hotels, cafes and restaurants For indoor and outdoor use (rust resistant) Scratch-free, crystal-clear, lightfast, shock-resistant and splinter-free Simple construction Different surfaces Easy to expand Other dimensions on request

To order this product, please log in here.

NEW
VMP
Counter sneeze guard Helga
Execution: with cut-out | Surface: Stainless steel design, material zamak
The panel consists of 6.38 mm laminated safety glass (VSG) and is scratch-resistant, crystal-clear, impact-resistant and of course splinter-free. With the supplied rubber-coated clamps in various surfaces such as matt grey, matt white or anthracite black, the window can be set up quickly and safely and can be expanded with additional elements as desired. The recess of the cough screen allows you to maintain safe, yet personal contact with your customers. By using the cough screen, you not only guarantee your employees high-quality protection against infections, but you also give your customers a feeling of safety. The cough guard is being mounted onto the desk with the help of the mobile hygiene protection post Xana. Only glass provides effective protection Effective disinfection against Covid-19 is only possible on glass. Transparent plastics such as acrylic glass cannot withstand treatment with substances effective against the Covid-19 virus. Disinfection with the agents 62-71% ethanol and 0.1% sodium hypochlorite that are suitable for the control of the Covid-19 virus will damage these plastics. Cracks appear, which means that the minimum hygienic requirements can no longer be met. The glass protection of G fittings thus offers a durable, ecological and safe solution. Source: Journal of Hospital Infection, Volume 104, Number 3, March 2020 246-251 Your benefits at a glance Optimal solution for hygiene of customers and staff Extremely suitable for pharmacies, hotels, notaries, architects, shops, doctors' surgeries, hotels, cafes and restaurants For indoor and outdoor use (rust resistant) Scratch-free, crystal-clear, lightfast, shock-resistant and splinter-free Simple construction Different surfaces Easy to expand Other dimensions on request

To order this product, please log in here.

NEW
Pocket sliding door Annkathrin
The G-Fittings Pocket sliding door system Annkatrin is suitable for installation in metal stud walls. The system is therefore extremely space-saving and the wall in front of it can be used completely. The high-quality carriages move with ball-bearing mounted plastic rollers in elegant aluminum profiles, which guarantee easy, wear-resistant and low-noise operation. All moving parts are protected against the ingress of dirt by a self-cleaning construction. Assembly is simple, quick and efficient. The advantages at a glance: All-glass doors 8 – 10 mm Quick and easy assembly, height adjustment +/- 3 mm Door leaf weight up to 80 kg Door widths from 580 mm ​Double-side cushioning Veneering of the running rail possible Shapely glass clamp and floor guide  

To order this product, please log in here.

New surface
PREMIUM Sliding door with lift protection Bertie
Mounting type: Glass / Glass | Surface: Anthracite black design
The PREMIUM sliding door Bertie from G-Fittings with anti-lift and point fixing is ideal for your living room or your workspace. The sliding door is suitable for wall mounting, wall/glass mounting or for completely glass walls. The carriage is made of stainless steel and has a magnetic anti-lift device. Available for glass thicknesses from 8 - 12.76 mm in satin stainless steel and black. The system is easy to assemble and extremely smooth and quiet. Sliding door fittings and components made of high-quality stainless steel Magnetic anti-lift for placement in the carriage Satin stainless steel and Anthracite black surfaces Adjustable in height (± 4 mm) Point fixings with concealed screws Barrier-free without floor rail Extremely smooth and quiet Easy to assemble Including mounting material and floor guide

To order this product, please log in here.

New lower price
Glass canopy, self-supporting Farah
Glass thickness: 25.52 mm | Length: 2500 mm
The self-supporting, frameless Fara awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®) Easy mounting and concealed mounting Up to 2 kN/m2 load capacity Glass width up to 5000 mm Easy mounting For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available) max. 1500 mm projection No tie rods required Glass tilt can be adjusted later Several wall profiles can be connected

To order this product, please log in here.

NEW
Glass door hinge Gilda
Opening direction: DIN right | Surface: Stainless steel design, aluminum material
Complete set including upper and lower corner fitting Opening direction DIN left / DIN right different surfaces such as stainless steel, silver matt anodized and black Quick and easy assembly Glass thickness 8 - 12 mm No floor recess required 2-way adjustment (±3mm left and right / ±8mm alignment adjustment)

To order this product, please log in here.

New glass thickness
Glass shelf support Kora
Glass thickness: 10 - 15 mm | Surface: Stainless steel design, material zamak
The KORA glass plate support is ideal for use with shelves, cupboards and shelves. The carrier is also suitable in the counter area and for a frame. The semicircular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches. Available in chrome and stainless steel design.

To order this product, please log in here.

NEW
G-Fittings professional laser range finder Lisa
The G-Fittings professional laser rangefinder LISA is dust and splash-proof according to IP54. The range finder is therefore also suitable under difficult working conditions for home, construction and industry, both indoors and outdoors. The pocket-sized, non-slip design and included tether ensure a secure hold. Achieve high-precision measurements with a reliable length measurement up to 40 m with a measurement accuracy of ± 1 mm. There are 6 units of measurement to choose from. The laser range finder is powered by 2x AAA 1.5V batteries (included). Handy and small pocket-sized range finder Indirect measurements using the Pythagorean theorem Continuous measurement Area measurement Bolume measurement Switchable backlight for easier reading in dark environments Addition and subtraction when calculating lengths Dust- and splash-proof housing for use under difficult conditions (IP54) Clearly visible red laser beam Convenient data memory for retrieving the last measurements The laser is switched off automatically after 60s to save the battery The device switches off automatically after 8 minutes Measurement Accuracy: ±1mm Max measuring range: 40 m 6 units of measurement to choose from Small weight of 104g Scope of delivery 1x Laser Distance Meter 2x AAA 1.5V batteries 1x transport bag 1x retaining strap 1x reflector card  

To order this product, please log in here.

NEW
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick. Connection and sealing of the butt joint of two panes of glass. Total width 40mm For 10,76-21,52 mm glass 10 mm between the glass panes (7 mm bridge) Color transparent Material PVC very good resistance to weathering, aging, UV and ozone no special glue needed  

To order this product, please log in here.

New surface
Sliding door roller component with lift protection Cathelijn
Surface: Anthracite black design
Der Laufwagen für Glasschiebetür Systeme Cathelijn verfügt über eine Aushebesicherung.  Die Aushebesicherung wird einfach unter der Laufschiene montiert und die Glastür kann sicher über den Laufwagen gleiten, ohne Gefahr zu laufen, ausgehoben zu werden.  Die Montage ist schnell und einfach. Es ist kein spezielles Werkzeug oder Fachwissen zur Montage der Aushebesicherung nötig.  Der Laufwagen für die Glasschiebetür ist in Edelstahl oder Schwarz Design erhältlich. 

To order this product, please log in here.

NEW
Glass door hinge Leni
Mounting type: Glass / Glass | Surface: Anthracite black design
Das Glastürscharnier LENI von G-Fittings ist ein Pendeltürbeschlag, der in 2 Montageoptionen erhältlich ist. Das Scharnier erreicht einen Bewegungsraum von 180°.  Das Scharnier besitzt eine automatische Schließfunktion ab einem Öffnungswinkel von 30°. Die Funktionen auf einen Blick: Edelstahl, Chrom und Schwarz Design Glasdicke 8 - 10 mm Soft-Close-Funktion bei 0° - 80° Feststellfunktion bei 85° - 90° Ganzglaswand oder Glas- / Wandmontage

To order this product, please log in here.

NEW
Hydraulic glass door hinge Liam
Mounting type: Glass / Glass | Surface: Anthracite black design
The hydraulic glass hinge LIAM from G-Fittings is a pendulum fitting available in 2 mounting options. The hinge achieves a range of motion of 180°.  The glassdoor hinge Liam has a soft-close function in a radius of 0° - 80° and a locking function, which keeps the door open at 85° - 90°. About a 4 mm hexagon head screw can be adjusted the strength with which the door closes in the self-return.   The hinge can thus be used in many ways - in their own living room door, in the Büro to design the meeting room through a transparent glass wall or even in their bathroom for the appropriate glass shower.  The functions at a glance: Stainless steel and black design Glass thickness 8 - 10mm Soft-close function at 0° - 80° Fixing function at 85° - 90° All-glass wall or glass / wall mounting

To order this product, please log in here.

NEW
Mini LED downlight (6 pcs.) Lita
Discover our LED mini downlights and expand products such as a bottle rack with a visually appealing lighting mood - 6 pieces per set, with 1W-3V (300mA), 100 lumens, a color temperature of 3000 Kelvin and a beam angle of 120 °. 6 pcs. LED mini downlight 1W-3V (300mA) 100 lumen 120° angle  

To order this product, please log in here.

NEW
Door handle, double-sided 90° Vina
Dimensions: 16 x 16 mm | Length: 300 mm | Surface: Stainless steel design
The G-Fittings Vina door handle with a square design in different lengths and colors is suitable for glass and wooden doors with a thickness of 6 - 40 mm. Pair of grab bars in square design (16 x 16 mm or 25 x 25 mm) stainless steel or black suitable for glass or wooden doors easy construction

To order this product, please log in here.

NEW
Shower door fitting Emily
Surface: silver matt anodized
The EMILY shower door fitting with narrow wall connection profile lifts the door comfortably when it is opened. The fitting is suitable for 6 mm glass and is available in different surfaces. Glass thickness 6 mm toughened safety glass with lifting/lowering mechanism for easy opening and closing (± 4 mm) Fixed on both sides at 90° Variable profiles compensate for uneven walls (± 8 mm) 180° swing doors Profile length 2000 mm different surfaces High quality fittings Plastic seals for wall and floor (optionally available) Use as a corner shower, shower cubicle next to a bathtub, walk-in shower, alcove shower and U-shape shower Scope of delivery 1 x wall profile 1 x intermediate profile 1 x glass profile 2 x end caps 1 x Ø 3 mm metal drill bit 1 x 5mm Allen Wrench 1 x 2.5mm Allen Wrench mounting screws and dowels

To order this product, please log in here.

NEW
Hands-free door opener Michelle
Get to know our hands-free door opener MICHELLE - the ergonomic elbow attachment is easily mounted on the existing door handle. The door can be opened easily with the elbow and the door handle no longer has to be operated by hand. In this way, doors can be opened and closed under hygienic conditions. This also eliminates the need to clean the door handle after each contact. The door opener is made of an antimicrobial polymer and is easy to clean. Available in black.

To order this product, please log in here.

NEW
Flush door handle Franci
The flush door handle FRANCI in stainless steel was developed for mounting on glass doors. The glass thickness can range from 8 - 10 mm. The door handle has a length of 120 mm and a height of 40 mm.

To order this product, please log in here.

NEW
Corner clamp 90°, square Annabell
Surface: Stainless steel design
The angle connector ANNABELL at 90° angle is ideal for mounting a glass pane on the wall. This connector is used, for example, in the installation of glass showers and is combined with a stabilizing rod. The glass pane requires two pre-drilled hole, which is hidden by the cover cap on the glass pane. The angle connector in stainless steel design trägt glass panels of a thickness of 8 - 12 mm. .

To order this product, please log in here.

NEW
Track holder for ceiling fixation Lasse
Surface: Anthracite black design
The ceiling mount LASSE is used for installing sliding doors under the ceiling. The bracket is easily installed with a screw in the ceiling. The tube of the sliding door is placed in the bracket and fixed with a grub screw. The ceiling mount is available in stainless steel or black design.

To order this product, please log in here.

NEW
Adapter ring for Mini LED Mika
Connection: for tube Ø 38.1 mm (1.5")
The adapter ring with socket MIKA is available as a flat and round connection. The ring made of stainless steel in black design has an outer diameter of 23mm. Use the adapter ring and the socket to insert a mini LED into a square or round tube and thus, for example, stylishly present your bottle rack.

To order this product, please log in here.

New surface
Handrail bracket Regina
Surface: Anthracite black design
Thanks to the support plate, the REGINA handrail bracket is suitable for both flat and round tubes. Round tubes with a diameter of 38 mm - 50 mm can be screwed onto the support plate. The support plate made of plastic has a stainless steel look but disappears under the tube. The handrail support is available in different designs, such as stainless steel, brass and black. Mounting is done from the inside, so the outside view is clean and no mounting points are visible.

To order this product, please log in here.