Soportes cristal
Portapuntas de cristal Ø 50 mm, ajustable Fiene
Altura:
30 mm
|
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
- Para cristal de 8 - 25,52 mm
- Portapuntas Ø 50 mm
- Rosca interior M10
- Diseño en acero inoxidable o negro
- Para interiores y exteriores
Portapuntas de cristal Ø 50 mm Hannie
Altura:
30 mm
- Para vidrio 8 - 25,52 mm
- Ø 50 mm, rosca M10
- Acero inoxidable V2A
- Versátil para paredes, barandillas, duchas
- Instalación sencilla y segura
Portapuntas, cuadrado Janna
Altura:
10 mm
- Acero inoxidable V4A de alta calidad para uso en exteriores
- Forma cuadrada de 58 x 58 mm
- Placa base 10 o 30 mm
- Para cristal de 8 - 25,52 mm
- Resistente a la corrosión y duradero
Pinza cristal Amarentia
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
- Para montaje en pared, escuadra y tubo
- Diseño semicircular
- En acero inoxidable V2A o zamak
- Para vidrio de 4 - 8,76 mm
- Pasador de bloqueo opcional
Pinza cristal Aarnoudje
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
- Para montaje en pared y tubo
- De acero inoxidable V2A o zamak
- Adecuado para vidrio de 4 - 8,76 mm
- Con juntas de goma sustituibles
- En cinco elegantes acabados
Pinza cristal Sjanoek
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
- Para montaje en pared, tubo cuadrado y redondo
- Flexible para vidrio 4 - 10 mm
- Disponible en acero inoxidable V2A y zamak
- Diferentes superficies para variar el diseño
- Ideal para proteger paredes y tabiques
Pinza cristal Annemarijne
Conexión:
plano
The glass clamp Annemarijne is a square glass clamp with light wölbung. The clamp is in stainless steel design. In the connection type flat, the clamp is suitable for wall mounting or für a square tube. The glass clamp is also available in the connection type for pipes with a diameter of 48.3 mm to 50.8 mm.
The glass clamp is used for sneeze guard models, bottle shelves, partition walls and glass showers. Über the associated rubber inserts are determined the glassärke. The glass rubbers are available separately.
Pinza cristal Nezha
Conexión:
plano
- Pinza de vidrio de alta calidad
- Forma curva semicircular
- Montaje plano y redondo
- Grosor del vidrio: 6 - 10 mm
- Varios diseños de superficie
Pinza cristal Zenovia
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
- Para montaje en pared, tubo cuadrado y redondo
- Versátil para tabiques y protecciones contra estornudos
- Adecuado para Ø 25 - 30 mm y 38 - 42 mm
- Disponible en 5 elegantes acabados
- Fijación segura del vidrio con goma de vidrio
Abrazadera de vidrio Benine
Conexión:
plano
|
Material:
Zamac
- Extremo de tubo con portavasos
- Fijación con tornillos en la parte inferior
- Para espesores de vidrio8 - 12,76 mm
- En zamak o acero inoxidable V4A
- Ideal para mostradores, tabiques, estanterías
Abrazadera de vidrio Emely
Conexión:
plano
|
Material:
Zamac
The glass clamp EMELY in stainless steel design is open on both sides and connects two glass panes in a 180° angle with each other.
The glass clamp made of V4A stainless steel is often used in salt water, swimming pools or the chemical industry.
With the matching rubber inserts, you determine the glass thickness for which the glass clamp is to be used.
Abrazadera de vidrio Djoeke
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
- Para espesores de vidrio de 6 a 12,76 mm
- Montaje en pared, tubo cuadrado o redondo
- Disponible para tubo Ø 38 - 42 y 48 - 50 mm
- Acero inoxidable V2A de alta calidad
- Inserto de goma a juego disponible por separado
Abrazadera de vidrio Celeste
- Acero inoxidable V4A para una máxima resistencia a la corrosión
- Abierto por ambos lados: ideal como conector de cristal de 180
- Perfecto para piscinas, costas e industria
- Grosores de vidrio flexibles gracias a los insertos de goma
- Fijación segura a las tuberías
Portavasos de acero inoxidable V4A Feike
- Fabricado en acero inoxidable V4A: máxima resistencia a la corrosión
- Ideal para piscinas, zonas costeras e industria
- Diseño discreto en acero inoxidable
- Para interiores y exteriores
- Puede utilizarse de forma variable para distintos grosores de vidrio
Pinza cristal Berta
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
- Para montaje en pared, escuadra y tubo
- Para Ø 38 - 42 y 48 - 51 mm
- En acero inoxidable V2A o zamak
- Opcionalmente con pasador de bloqueo
- Para espesores de vidrio de 6 a 10 mm
Soporte para estante de vidrio Kora
Espesor del vidrio:
6 - 8 mm
|
Superficie:
puro
The KORA glass plate support is ideal for use with shelves, cupboards and shelves. The carrier is also suitable in the counter area and for a frame. The semicircular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches. Available in chrome and stainless steel design.
Soporte cristal Karlijn
Conexión:
plano
|
Material:
Zamac
|
Superficie:
Diseño en acero inoxidable, material zamak
The glass mounting adapter Karlijn makes it possible to attach a glass pane directly flat to a counter or any other mounting point. The glass requires a pre-drilled hole into which the clamp is inserted. The holder has a threaded screw with which it can be screwed to the counter and thus forms a direct connection between the counter and the glass pane.
A device that would have to be placed on or in front of the counter or table is no longer necessary. Suitable for glass thicknesses of 8-16 mm. Also available as an adapter for tubes of 38-42 mm or 48-50 mm.
Adaptador Jella
Conexión:
plano
|
Material:
Zamac
- Para tubos de 38,1 - 42,4 mm y 48,3 - 50,8 mm
- Material: acero inoxidable V4A o zamak
- Conexión plana para portavasos
- Resistente a la corrosión y robusto
- Apto para uso interior y exterior
Soporte para estante de cristal con apoyo goma Debra
Conexión:
plano
|
Longitud:
200 mm
|
Superficie:
Diseño en acero inoxidable, material zamak
The glass plate support Debra is available as flat mount and tube mount. The carrier is ideal for shelves and similar installations. In tube assembly, the carrier is attached to the tube with a grub screw.
The carrier is available in a length of 200 or 300 mm.
Soporte bisagra Lucilla
Conexión:
plano
- Adaptador giratorio 360
- Cierre seguro con protección de goma
- Para rosca M6
- Compatible con tubos planos y redondos
Pieza final para perfil de estante de vidrio Celine
The end caps for glass shelf profiles are made of plastic and have a gray - stainless steel design. Only available as a pair.
Soporte cristal Tibelda
Superficie:
Diseño en acero inoxidable, material zamak
The TIBELDA glass holder in the shape of a cylinder is used for mounting and securing glass plates on flat surfaces. For example, the glass holder is screwed to a glass plate support and the glass pane is clamped in the holder.
No drilling is necessary for the glass pane, as it is secured with a grub screw. The glass thickness can be chosen from 6 - 10 mm. A rubber insert provides additional protection.
Soporte para estante de vidrio Malu
Superficie:
Diseño en acero inoxidable, material zamak
The free-floating MALU glass plate support supports glass plates with a maximum depth of 150 mm. Thanks to the bar, the leverage is better transferred to the wall and thus allows heavier loads. The glass plate support is mounted directly on the wall. This results in numerous applications, for example as a shelf or as a shelf in the bathroom.
The Malu carrier is suitable for glass thicknesses of 6 - 10 mm and is available in stainless steel or chrome.
Soporte para estante de vidrio Franca
Superficie:
Diseño en acero inoxidable, material zamak
The FRANCA glass plate support is ideal for use with shelves, cupboards and shelves. The rectangular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches.
Perfil de goma para perfil de estante de vidrio, 5000 mm Elif
Espesor del vidrio:
8 mm
The rubber profile ELIF is used as an insert in the glass shelf profile, for example in our Henrietta glass shelf set. It ensures that the clamped glass pane does not slip and securely supports the shelf. The rubber profile is available for glass thicknesses of 8 mm and 10 mm.
Soporte para estante de vidrio Grete
Espesor del vidrio:
6 - 8 mm
|
Superficie:
Diseño en acero inoxidable, material zamak
- Semicircular
- Mejor distribución del peso
- Hasta 150 mm de profundidad
Soporte cristal Janouk
Longitud:
15 mm
|
Ø Diámetro:
16 mm
The glass holder JANOUK has an M6 thread for fixing the glass pane. This can be used in a thickness of 5 - 12 mm. The glass holder is available in different lengths from 15 mm to 102 mm and with a diameter of 16 mm to 40 mm. The glass holder made of stainless steel can be used, for example, as a clean finish for a sneeze guard model or a sneeze guard in the counter area.
Soporte para estante de cristal Viki
Espesor del vidrio:
6 - 8 mm
|
Superficie:
Diseño en acero inoxidable, material zamak
- Dimensiones precisas
- Diseño en acero inoxidable o cromado
- Espesor del vidrio de 6 - 8 mm o 10 - 15 mm
- Instalación sencilla
Soporte cristal con asiento a ras Dewine
Glass holder DEWINE with countersunk head. The stainless steel glass holder has an M6 thread for the countersunk head, which holds the glass securely in position.
Soporte tope final Petrine
Conexión:
plano
|
Superficie:
Diseño en acero inoxidable, material zamak
Will you choose the glass stop PETRINE flat or for tubes with diameters 25.4 mm to 30 mm or 38.1 mm to 42.4mm.For the surface you have the following choices
Stainless steel
brass
Chrome
Black