Saltar al contenido principal

Marquesina de vidrio, autoportante Farah

Número de producto: 7729203125046
Descripción

The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®)

  • Easy mounting and concealed mounting
  • Up to 2 kN/m2 load capacity
  • Glass width up to 5000 mm
  • Easy mounting
  • For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available)
  • max. 1500 mm projection
  • No tie rods required
  • Glass tilt can be adjusted later
  • Several wall profiles can be connected
Eigenschaften
Ancho en mm: 2500 mm
Autoportante:
Capacidad de carga: 2 kN/m²
Cristal: 17,52 mm (8 - 1,52 - 8 mm)
Inclinación ajustable: ± 3°
Material: Aluminio
Montaje en: Pared
Perfil de altura: 106 mm
Perfil de ancho: 2500 mm
Perfil de profundidad: 120 mm
Perfil pré taladrado:
Procesamiento de vidrio:
Superficie: plata anodizado mate
Vidrio: SentryGlas® 17,52 mm
Vidrio incluido: no
max. capacidad de carga: 1000 mm
Descargas
Ficha técnica
Ficha técnica
Ficha técnica
Ficha técnica
77-29-2031-xxx-46_2D.dxf
dxf - 786.68 KB
Archivo CAD
29-2041-xxx-46_2D.dxf
dxf - 867.31 KB
Archivo CAD
Archivo CAD
Archivo CAD
Technical-report-G-Fittings®_Farah_ENG.pdf Ficha técnica 474.51 KB pdf
Technical-report-G-Fittings®_Farah_DE.pdf Ficha técnica 474.49 KB pdf
FARAH-2041-2042_profile-drill-pattern.pdf Ficha técnica 122.16 KB pdf
77-29-2031-xxx-46_manual_G-FITTINGS.pdf Ficha técnica 3.07 MB pdf
77-29-2031-xxx-46_2D.dxf Archivo CAD 786.68 KB dxf
29-2041-xxx-46_2D.dxf Archivo CAD 867.31 KB dxf
29-2041-FARAH_glass-canopy.dxf Archivo CAD 3.65 MB dxf
29-2031-FARAH_glass-canopy.dxf Archivo CAD 4.49 MB dxf
9 Varianten verfügbar
Filtro
Accesorios
Glas Dichtungsprofil aus Kunststoff, 7744075125000
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick. Connection and sealing of the butt joint of two panes of glass. Total width 40mm Length 2500 mm For 10,76-21,52 mm glass 10 mm between the glass panes (7 mm bridge) Color transparent Material PVC very good resistance to weathering, aging, UV and ozone no special glue needed  
Glas Dichtungsprofil aus Kunststoff, 7744075125000
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick. Connection and sealing of the butt joint of two panes of glass. Total width 40mm Length 2500 mm For 10,76-21,52 mm glass 10 mm between the glass panes (7 mm bridge) Color transparent Material PVC very good resistance to weathering, aging, UV and ozone no special glue needed