Marquesinas

Proteja su zona de entrada de forma elegante y moderna con el toldo de cristal autoportante NANE. Este toldo elegante y de alta calidad no solo ofrece una protección óptima contra la intemperie, sino que también añade un toque arquitectónico a su hogar. Propiedades: Diseño moderno: el diseño sin marco pero elegante se integra perfectamente en cualquier diseño de fachada y añade un toque de exclusividad a la entrada de su casa. Diseño moderno: el diseño sin marco pero elegante se integra perfectamente en cualquier diseño de fachada y añade un toque de exclusividad a la entrada de su casa. Materiales de alta calidad: Fabricado en aluminio inoxidable, el toldo NANE no solo ofrece ventajas estéticas, sino también la máxima estabilidad y durabilidad. Fácil instalación: La marquesina NANE se suministra con instrucciones de instalación detalladas. Los orificios pretaladrados y el material de montaje suministrado permiten una instalación rápida y sencilla. Fácil instalación. Uso versátil: Ya sea para entradas privadas o áreas comerciales - el toldo de cristal NANE es versátil y mejora cualquier área de entrada. Los agujeros pretaladrados y el material de montaje suministrado permiten una instalación rápida y sencilla. Datos técnicos: Dimensiones: ancho 1500 mm x alto 80 mm x fondo 100 mm, ancho 3000 mm x alto 80 mm x fondo 100 mm Material: Vidrio laminado de seguridad (VSG) de vidrio TVG 17,52 mm, aluminio Capacidad de carga: Carga de viento y nieve hasta 3,8 kN/m2 (esto corresponde a aprox. 3,8 m de altura de nieve nueva con proyección máxima y Sentry Glas®) proyección máxima: 1200 mm Color plata anodizado mate, crudo Ventajas: Protección óptima frente a la lluvia y la nieve Color RAL a elegir (opcional) Calidad alta y alta resistencia a la corrosión. Construcción robusta y de alta calidad Iluminación LED opcional Iluminación LED opcional. Iluminación LED disponible opcionalmente Diseño atemporal y atractivo Fácil instalación Instalación rápida y sencilla Fácil de limpiar Fácil de limpiar y resistente a la intemperie Alcance de suministro: 1 ud. Perfil de sujeción a la pared con juntas 2 uds. Tapas finales 1 ud. Juego de fijación para vidrio 1 ud. Llave para levas de bloqueo

Las tapas finales para el perfil de sujeción a la pared de la marquesina de cristal NANE proporcionan un acabado limpio y estético a los extremos del perfil lateral. Se suministran en un práctico juego de 2 y se instalan mediante encolado, lo que garantiza una fijación sencilla y segura.

Las juntas para el tejadillo de cristal NANE son componentes esenciales para la fijación segura y la estabilización de los cristales. Están especialmente diseñadas para grosores de vidrio de 16,76 a 17,52 mm y garantizan una fijación y protección fiables de las superficies acristaladas. Con su elaboración de alta calidad, contribuyen significativamente a la durabilidad y seguridad de su marquesina de cristal NANE.

The drainage adapter for connecting DN32 PVC pipes to the glass canopy, self-supporting Sophia.

Our glass canopy with point holders and tubular supports GILLA is made of high quality V2A stainless steel and is the ideal solution to bring elegance and functionality to your entrance area. This stunning canopy is designed to not only provide protection from the elements, but also add a timeless design element to your entryway. High-quality V2A stainless steel: The canopy is made of V2A stainless steel, which ensures excellent corrosion resistance and durability. As a result, your glass canopy will retain its flawless shine for many years to come. Adjustable pipe supports: The pipe supports can be adjusted as needed to perfectly position and stabilize the canopy. Point support system: The glass is held securely and elegantly by the point support system, which not only provides stability but also offers an aesthetically pleasing look. Multiple Glass Thickness Compatibility: Our canopy is designed for glass panes from 10mm to 17.52mm, giving you the flexibility to choose the appropriate glass thickness for your needs. Protection from the elements:This canopy provides protection from rain, snow and sunlight, keeping your entryway dry and secure.

Supported canopy SOPHIA is a frameless canopy system from G-Fittings that is supported solely by a narrow wall profile. The combination of wall clamping profile and special glass ensures an extraordinary load-bearing capacity of up to 150 kilos per square meter for the self-supporting glass canopy. The SOPHIA self-supporting glass canopy has a maximum projection of 130 cm. The maximum profile width is 500 cm. At this maximum width, the glass is distributed over two to three individual panes, making installation easier. The self-supporting SOPHIA glass canopy features a unique drainage system that channels rainwater out of the side of the profile. Optionally, you can turn your entrance area into a real eye-catcher by equipping the wall clamping profile with our LED flex strip set. This illuminates your canopy indirectly and can also serve as an orientation light without additional lights. Choose between neutral, white light or RGB with color change. If you are planning a very wide canopy, let our experts advise you without obligation. Canopy complete set Maximum projection of 130 cm Wall clamping profile made from high-quality aluminum New drainage system load capacity: 1.5 kN/m² Various lengths available (other dimensions on request.) Optional LED lighting Glass optionally available

A glass canopy with point brackets charmingly sets the scene for your entrance area. The Dittie glass canopy with point brackets is supported by 6 point brackets made of stainless steel and stabilized by 2 additional rods, each of which connects 2 point brackets with each other. The glass canopy is firmly anchored at 4 points. The combination of point fixings and special glass enables an extremely high load of 2.51 kN/m². The Aminata point fasteners for glass mounting are fixed in the glass by means of pre-drilling. Additional point holders are used for mounting on a load-bearing wall. The angle of the glass canopy is slightly sloping at 93° so that water runs off to the front. easy installation for glass thickness: 10mm -17.52mm up to 2.51 kN/m2 load capacity individual dimensions possible stainless steel design maximum projection: 1300 mm  

The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®) Easy mounting and concealed mounting Up to 2 kN/m2 load capacity Glass width up to 5000 mm Easy mounting For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available) max. 1500 mm projection No tie rods required Glass tilt can be adjusted later Several wall profiles can be connected

The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick. Connection and sealing of the butt joint of two panes of glass. Total width 40mm Length 2500 mm For 10,76-21,52 mm glass 10 mm between the glass panes (7 mm bridge) Color transparent Material PVC very good resistance to weathering, aging, UV and ozone no special glue needed  

The SPIJKER wall mounting plate is a robust solution made of high-quality stainless steel, designed for mounting canopies to the wall using point fixings. With a diameter of 100 mm and a thickness of 6 mm, this plate provides a stable base for secure fastening.

The point bracket for glass canopies RENATA offers a stable and flexible mounting solution for your canopy. Equipped with a movable tie rod joint, which is connected to the glass canopy via an M10 threaded rod, the point bracket allows the canopy to be individually adjusted. Installation is simple and secure using two screws in the wall. The stainless steel point bracket with tie rod joint not only ensures secure installation, but also allows you to position the canopy as you wish.

The glass canopy point bracket AMINATA offers a stable and flexible mounting solution for your canopy. Equipped with a movable tie rod joint, which is connected to the building wall via an M10 threaded rod, the point bracket allows the canopy to be individually adjusted. The point bracket is securely mounted to the glass canopy using a 58 mm glass plate holder. The point bracket with stainless steel tie rod joint not only ensures secure installation, but also offers the option of positioning the canopy as you wish.

The LIEKE glass canopy point holder is characterized by its movable articulated arm with glass holder. It is easy and secure to install using two screws in the wall. The point bracket with stainless steel joint not only ensures secure installation, but also allows you to position the canopy as you wish.

The rod with M10 thread left/right DYONNE is made of stainless steel. It is available in standard lengths of 830 mm or can be cut to individual dimensions. This versatile rod offers reliable threaded connections and is ideal for various applications.

The glass canopy with heavy-duty supports ZACHARY offers a modern and elegant solution for the entrance area. Made of high-quality V2A stainless steel in a stainless steel design, it not only guarantees an appealing aesthetic, but also durability and weather resistance. Held in place with two robust heavy-duty supports, the canopy allows a maximum projection of 1000 mm, offering flexibility in the design of the entrance area. It is compatible with glass thicknesses of 12, 12.76, 16.76 or 17.76mm and is fixed at a 93° angle to the wall to ensure that water effectively drains away from the front edge of the canopy.