Herrajes enrasados
T Ceress
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The T-tube connector Ceress is used as a center piece for a handrail, sneeze guard post or bottle rack, but is also used in cloakrooms. The T-piece has a 90° angle and a visible length of 60 mm. The tube is glued on the inside at the ends. Our EXTRA-Lock metal adhesive Jannelies is suitable for this. The Ceress tube connector can be ordered with a diameter of 25 or 38 mm in all of our available finishes, such as matt brass and stainless steel.
Conector de tubo cuadrado variable Lyndsey
The variable square tube connector LINDSEY is an innovative solution for the flexible connection of 35x35 mm square tubes. With its unique ability to be variably adjusted by 180 degrees, the tube connector offers maximum adaptability for different angles and configurations. Made from high-quality stainless steel, it combines robustness with a modern design.
Conexión de tubo cuadrado de 90° con 1 salida de 90° Kyara
Dimensiones:
20 x 20 mm
|
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The square tube connector KYARA has a branch with 90° and the connections are also at 90° angle to each other and thus form a corner connector. The stainless steel connector is available in 20x20 mm dimension and 35x35 mm dimension and connects square tubes such as our square tube Carlotta.
The square tube is glued and pushed onto the ends of the corner connector - this allows easy assembly of the tubes without welding. The outer side of the pipes close flush with the connector.
Tubes connected in this way are used in many ways - among other things as handrails, footrails, demarcations and barriers, in a sneeze guard or tray slides.
Codo ajustable Agenieta
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
|
Ø Diámetro:
25,4 mm (1")
The Agenieta tube connector can be variably adjusted using a hexagon socket screw. The connector can be adjusted in a 180° angle.
The joint can be easily fixed with an Allen key.
The pipe connector is suitable for pipes with a diameter of 38.1 mm. Choose from stainless steel, brass, matt brass or black design.
Codo 90° Marly
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
19,0 mm
The Marly tube connector is used, for example, as an end piece for a handrail or a rectangular frame. Often this is also referred to as a knee or bow. The end pieces are each 30 mm long and are glued to the inner tube. There are different surfaces and diameters for the tube connector to choose from.
Pipe connector in stainless steel
Pipe connector in brass
Pipe connector in matt brass
Pipe connector in black
Codo soporte con 1 salida 90° Daniella
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The socket elbow Daniella has 1 branches at a 90° angle. The connector enables, for example, the construction of handrails, footrails and other pipe connection systems.
The Daniella G-Fittings spherical tube connector is available in diameters of 25.4 mm, 38.1 mm and 50.8 mm.
The connector has a large selection of different designs:
stainless steel
Brass
Brass matt
chrome
Black
Conexión de tubo cuadrado T con 1 salida Allson
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Conexión de tubo cuadrado esquina 90 ° Krystle
Dimensiones:
20 x 20 mm
|
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Herrajes enrasados Aibeltje
Ø Diámetro:
19,0 mm
The ALBERTJE pipe connector is ideal for securely connecting two pipes. The end with the knurling is hammered into the tube until it can no longer be seen. The other end of the pipe connector is glued to the second pipe.
Characteristics:
for sticking and gluing - no welding necessary
suitable for indoor and outdoor use
Codo 90° Mia
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
|
Ø Diámetro:
25,4 mm (1")
The tube connector Mia connects 2 tubes via a 90° angle.
The pipes are glued to the pipe connector in order to meet all requirements. There are no limits to the design possibilities. Whether handrail, footrail, post system or railing.
Choose from our finishes such as stainless steel, brass or black.
different diameters
different surface designs
easy construction
shipping faster
Codo 80° Ulku
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The tube connector with an 80° angle Ulku enables numerous applications such as handrails, railings or post systems.
The pipe is glued on the inside, our metal adhesive Jannelies is suitable for this.
The tube connector can be ordered with a diameter of 25.4 mm or 38.1 mm and many surface designs such as stainless steel or brass.
Codo 30° Annelis
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The 30° tube connector Annelis from G-Fittings made of die-cast zinc is available for round tubes with a diameter of 38.1 mm. We have it in different surfaces such as stainless steel, brass or black. With this plug-in fitting, round pipes with the usual dimensions can be connected at an internal angle of 30°. There are hardly any limits to the intended use. Almost everything that needs to be guided around corners can be constructed with it, from railing handrails, foot rails to fall protection.
Cruz Marinke
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The cross tube connector Marinke connects 4 tubes with each other at a 90° angle.
The pipes are glued on the inside and connected to the pipe connector.
The Marinke flush cross connector can be ordered in 25.4 mm and 38.1 mm. Choose from our finishes such as stainless steel, brass and matt brass.
T con 1 salida 90° Armande
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
Armande is a T-tube connector with a 90° branch. In addition to its 90° branch, the T-piece has a visible length of 60 mm. The tube is glued on the inside at the ends. Our EXTRA-Lock metal adhesive Jannelies is suitable for this.
The Armande tube connector can be ordered with a diameter of 25 or 38 mm in all of our available finishes, such as matt brass and stainless steel.
Codo 90° con 1 salida 90º Kaia
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The Kaia tube connector is a 90° connector with 1 branch and is used, for example, for a handrail. The connecting pieces are each 30 mm long and are glued to the inner tube. There are different surfaces and diameters for the tube connector to choose from.
Build your handrail with 90° tube connector and create quick solutions with the G-Fittings tube connector Kaia.
Codo 90° Alita
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The 90° corner bend Alita from G-Fittings made of die-cast zinc is available for different round tube diameters and wall thicknesses. We have it in various surfaces such as ground stainless steel, high-gloss polished, brass or matt brass. With this plug-in fitting, round pipes with the usual dimensions can be connected at an inside angle of 90°. There are hardly any limits to the intended use. Almost everything that needs to be guided around corners can be constructed with it, from railing handrails, foot rails to fall protection.
For creative design and simple self-assembly of:
Staircase railings, handrails, foot rails, balcony railings
Furniture, frames, table frames, clothes rails
Bumper bar, cowcatcher or crash bar, bathing ladder
Information signs, company and stainless steel advertising signs
Railing for bistro or boat and many other self-constructions
Codo soporte con 2 salidas 90° Rochella
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
38,1 mm (1,5")
The Rochella spherical tube connector has 2 branches at a 90° angle.
The G-Fittings ball tube connector Rochella is available in diameters of 25.4 mm, 38.1 mm and 50.8 mm.
The connector has a large selection of different designs:
stainless steel
Brass
Brass matt
chrome
Black
Codo 45° Annekoos
Superficie:
Diseño en acero inoxidable, material zamak
|
Ø Diámetro:
25,4 mm (1")
The 135° corner bend Annekoos from G-Fittings made of die-cast zinc is available for different round tube diameters and wall thicknesses. We have it in various surfaces such as ground stainless steel, highly polished, brass or black. With this plug-in fitting, round pipes with the usual dimensions can be connected at an internal angle of 135°. There are hardly any limits to the intended use. Almost everything that needs to be guided around corners can be constructed with it, from railing handrails, foot rails to fall protection.
Flush angles in stainless steel design - for round and square tubes
Pipe connectors are available in numerous variants. Pipe connectors appear as a T-piece, with a 90° angle with a round or square branch.
The Zamak fittings in stainless steel design are produced for round and square tubes.
The high-quality tube connectors are suitable as components for handrails, footrails, fences, furniture and railings. The pipe connectors and the associated stainless steel pipes are used in private living areas and in commercial buildings alike.
Tubes and rods
Tubes and rods are the basic structure of the tube racking systems and all products that result from the connecting elements. Pipe connectors connect the selected pipes either after the maximum length of the pipe is reached or when the pipe needs a branch. In this way, angles of 90°, 45° or 120° can be created and the pipe can be steered in the desired direction using the connector.
The tube connectors are available for round and square tubes and in a wide range of designs, such as stainless steel, silver anodized or black.
Areas of application
Pipe connectors, as well as supports and adapters are essential components for more complex and larger furnishing systems that are created from pipe connection systems, such as sneeze guard models, hygiene protection, bottle shelves or hand and foot rails.