Auvents

Protégez votre entrée avec style et modernité grâce à l'auvent en verre autoportant NANE. Cet auvent élégant et de grande qualité offre non seulement une protection optimale contre les intempéries, mais constitue également un point fort architectural pour votre maison. Caractéristiques: Design moderne : le design à la fois sans cadre et élégant s'intègre parfaitement dans chaque conception de façade et confère à votre entrée de maison une touche d'exclusivité. Matériaux de haute qualité : Fabriqué en aluminium inoxydable, l'auvent NANE offre non seulement des avantages esthétiques, mais aussi une stabilité et une durabilité maximales. Construction en porte-à-faux : grâce à la construction en porte-à-faux sans supports gênants, la zone d'entrée reste spacieuse et ouverte. Entretien facile : l'auvent NANE est livré avec des instructions de montage détaillées. Les trous pré-percés et le matériel de montage fourni permettent une installation rapide et facile. Polyvalent : Que ce soit pour l'entrée de la maison privée ou pour le secteur commercial, l'auvent en verre NANE est polyvalent et valorise chaque entrée. Données techniques: Dimensions : L 1500 mm x H 80 mm x P 100 mm, L 3000 mm x H 80 mm x P 100 mm Matériau : verre de sécurité feuilleté (VSG) en verre TVG 17,52 mm, aluminium Capacité de charge : charge de vent et de neige jusqu'à 3,8 à kN/m2 (ce qui correspond à environ 3,8 m de hauteur de neige fraîche avec saillie maximale et Sentry Glas®) portée max.: 1200 mm Couleur argent anodisé mat, brut Avantages: Protection optimale contre la pluie et la neige Couleur RAL au choix (en option) Construction robuste et de haute qualité L'éclairage LED est possible en option Design intemporel et attrayant Montage rapide et facile Facile à entretenir et résistant aux intempéries Livraison : 1 pc. Profilé de serrage mural avec joints d'étanchéité 2 pcs. embouts 1 pc. Kit de fixation du verre 1 pc. clé pour came de verrouillage

Les embouts pour le profilé de serrage mural de l'auvent en verre NANE assurent une finition propre et esthétique des extrémités latérales du profilé. Ils sont livrés dans un set pratique de 2 pièces et sont montés par collage, ce qui garantit une fixation simple et sûre.

Les joints pour l'auvent en verre NANE sont des composants essentiels pour la fixation et la stabilisation sûres des vitres. Ils sont spécialement conçus pour des épaisseurs de verre de 16,76 à 17,52 mm et garantissent une fixation et une protection fiables des surfaces vitrées. Grâce à leur finition de haute qualité, ils contribuent de manière décisive à la longévité et à la sécurité de votre auvent en verre NANE.

The drainage adapter for connecting DN32 PVC pipes to the glass canopy, self-supporting Sophia.

Our glass canopy with point holders and tubular supports GILLA is made of high quality V2A stainless steel and is the ideal solution to bring elegance and functionality to your entrance area. This stunning canopy is designed to not only provide protection from the elements, but also add a timeless design element to your entryway. High-quality V2A stainless steel: The canopy is made of V2A stainless steel, which ensures excellent corrosion resistance and durability. As a result, your glass canopy will retain its flawless shine for many years to come. Adjustable pipe supports: The pipe supports can be adjusted as needed to perfectly position and stabilize the canopy. Point support system: The glass is held securely and elegantly by the point support system, which not only provides stability but also offers an aesthetically pleasing look. Multiple Glass Thickness Compatibility: Our canopy is designed for glass panes from 10mm to 17.52mm, giving you the flexibility to choose the appropriate glass thickness for your needs. Protection from the elements:This canopy provides protection from rain, snow and sunlight, keeping your entryway dry and secure.

Supported canopy SOPHIA is a frameless canopy system from G-Fittings that is supported solely by a narrow wall profile. The combination of wall clamping profile and special glass ensures an extraordinary load-bearing capacity of up to 150 kilos per square meter for the self-supporting glass canopy. The SOPHIA self-supporting glass canopy has a maximum projection of 130 cm. The maximum profile width is 500 cm. At this maximum width, the glass is distributed over two to three individual panes, making installation easier. The self-supporting SOPHIA glass canopy features a unique drainage system that channels rainwater out of the side of the profile. Optionally, you can turn your entrance area into a real eye-catcher by equipping the wall clamping profile with our LED flex strip set. This illuminates your canopy indirectly and can also serve as an orientation light without additional lights. Choose between neutral, white light or RGB with color change. If you are planning a very wide canopy, let our experts advise you without obligation. Canopy complete set Maximum projection of 130 cm Wall clamping profile made from high-quality aluminum New drainage system load capacity: 1.5 kN/m² Various lengths available (other dimensions on request.) Optional LED lighting Glass optionally available

A glass canopy with point brackets charmingly sets the scene for your entrance area. The Dittie glass canopy with point brackets is supported by 6 point brackets made of stainless steel and stabilized by 2 additional rods, each of which connects 2 point brackets with each other. The glass canopy is firmly anchored at 4 points. The combination of point fixings and special glass enables an extremely high load of 2.51 kN/m². The Aminata point fasteners for glass mounting are fixed in the glass by means of pre-drilling. Additional point holders are used for mounting on a load-bearing wall. The angle of the glass canopy is slightly sloping at 93° so that water runs off to the front. easy installation for glass thickness: 10mm -17.52mm up to 2.51 kN/m2 load capacity individual dimensions possible stainless steel design maximum projection: 1300 mm  

The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®) Easy mounting and concealed mounting Up to 2 kN/m2 load capacity Glass width up to 5000 mm Easy mounting For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available) max. 1500 mm projection No tie rods required Glass tilt can be adjusted later Several wall profiles can be connected

Le profilé d'étanchéité universel LARA de G-Fittings, d'une largeur de 40 mm, sert à relier et à étancher deux vitres d'une épaisseur de 10,76 mm ou plus. Pour la liaison et l'étanchéité des joints entre deux vitres. Largeur totale 40 mm Longueur 2500 mm Pour verre 10,76-21,52 mm 10 mm entre les vitres (entretoise de 7 mm) Couleur transparente Matériau PVC Très bonne résistance aux intempéries, au vieillissement, aux UV et à l'ozone pas de colle spéciale nécessaire

The SPIJKER wall mounting plate is a robust solution made of high-quality stainless steel, designed for mounting canopies to the wall using point fixings. With a diameter of 100 mm and a thickness of 6 mm, this plate provides a stable base for secure fastening.

The point bracket for glass canopies RENATA offers a stable and flexible mounting solution for your canopy. Equipped with a movable tie rod joint, which is connected to the glass canopy via an M10 threaded rod, the point bracket allows the canopy to be individually adjusted. Installation is simple and secure using two screws in the wall. The stainless steel point bracket with tie rod joint not only ensures secure installation, but also allows you to position the canopy as you wish.

The glass canopy point bracket AMINATA offers a stable and flexible mounting solution for your canopy. Equipped with a movable tie rod joint, which is connected to the building wall via an M10 threaded rod, the point bracket allows the canopy to be individually adjusted. The point bracket is securely mounted to the glass canopy using a 58 mm glass plate holder. The point bracket with stainless steel tie rod joint not only ensures secure installation, but also offers the option of positioning the canopy as you wish.

The LIEKE glass canopy point holder is characterized by its movable articulated arm with glass holder. It is easy and secure to install using two screws in the wall. The point bracket with stainless steel joint not only ensures secure installation, but also allows you to position the canopy as you wish.

The rod with M10 thread left/right DYONNE is made of stainless steel. It is available in standard lengths of 830 mm or can be cut to individual dimensions. This versatile rod offers reliable threaded connections and is ideal for various applications.

The glass canopy with heavy-duty supports ZACHARY offers a modern and elegant solution for the entrance area. Made of high-quality V2A stainless steel in a stainless steel design, it not only guarantees an appealing aesthetic, but also durability and weather resistance. Held in place with two robust heavy-duty supports, the canopy allows a maximum projection of 1000 mm, offering flexibility in the design of the entrance area. It is compatible with glass thicknesses of 12, 12.76, 16.76 or 17.76mm and is fixed at a 93° angle to the wall to ensure that water effectively drains away from the front edge of the canopy.