Sliding glass wall
Paroi coulissante en verre pour terrasse CTO Agape
- Processus de configuration intuitif
- Pas de traitement du verre nécessaire
- Fabrication sur mesure
- Design moderne
- Testé selon UNI EN 1932:2013 classe 6
Porte coulissante pliante latéral Aleide
Longueur:
2000 mm
|
Nombre d'ailes:
2
The foldable, horizontal sliding glass wall ALEIDE is ideal for terraces and balcony partitions. The individual panels of the sliding glass wall form a continuous transparent surface – without any side frame. When open, the panels are parked on the side. To ensure maximum freedom of movement, a recessed bottom guide is provided. The clamping technology makes glass processing superfluous. The variable carriages can accommodate glass thicknesses between 10 - 10.76 or 12 - 12.76 mm as standard. After glass assembly, height compensation of + 6 mm and - 3 mm is possible.
The advantages of the sliding wall at a glance:
Stable, lightweight and adjustable bottom slide
Installation types: built-in gooseneck and freestanding.
Both hands-free with door lock and side lock
Typical installation for pergolas, porches with non-load-bearing structures, terraces and balconies
variable lengths available
Porte coulissante pliante centrale Myralijn
Longueur:
1500 mm
La porte coulissante pliante centrale 2200 vous offre une grande flexibilité. Les ailes individuelles sont reliées les unes aux autres par des charnières et fournissent ainsi le même effet. L'aile latérale fixe peut être utilisée comme un passage indépendant sans ouvrir toute la paroi. Le traitement du verre n'est plus nécessaire grâce à la technologie de serrage. Les voitures variables ont une épaisseur de verre standard entre 10 - 10,76 ou 12 - 12,76 mm. Après le montage du verre, une compensation de hauteur de + 6 mm et - 3 mm est possible.
Pared de vidrio apilable Aleandra
Longueur:
3600 mm
The all-glass sliding and stacking wall ALEANDRA by G-Fittings is a glass sliding wall system for balconies, patios, summer gardens, as room closures or room dividers. The wall protects you both indoors and outdoors from wind, weather and noise. The individual leaves run on high-quality vertical rollers with a plastic coating and are almost maintenance free. When open, the wings are stacked on the side.
The system does not require a lower floor rail, therefore maximum freedom of movement is guaranteed and your living space remains barrier-free. The glass panes are firmly clamped into the profile - no glass processing is required. The first wing opens the stacking room as a rotating wing - all other wings are moved individually into the stacking room. The variable carriages hold glass thicknesses between 10 - 10.76 or 12 - 12.76 mm as standard. After the glass has been installed, a height adjustment of + 6 mm and - 3 mm is possible.
Empilage mural avec guide au sol Mylenka
Longueur:
2400 mm
The glass stacking wall with floor guide MYLENKA from G-Fittings is a sliding glass wall system for balconies, terraces, summer gardens, as a room closure or room divider. The wall protects you both indoors and outdoors from wind, weather and wind.
The individual wings run on high-quality vertical rollers with plastic coating and are virtually maintenance-free. When open, the panels are stacked sideways. The glass panes are firmly clamped into the profile – glass processing is üsuperfluous. The first panel opens the stacking area as a rotating panel, all other panels are moved individually into the stacking area. The variable carriages hold glass thicknesses between 8.76 mm - 10.76 mm as standard;
The stacking wall can be in different lengths and thus equipped with several wings: from 2400 mm to 6400 mm.
Balcón de vidrio apilable Zolda
Longueur:
2400 mm
The balcony sliding and stacking wall ZOLDA by G-Fittings expands your balcony with additional living space and protects against rain, wind and noise from outside. Thanks to the internal, lateral packing, it is possible to clean the panoramic glass in total safety. The clamping technology makes glass processing superfluous. The variable carriages hold glass thicknesses between 8 - 8.76 or 10 - 10.76 mm as standard. The profiles are made of high-quality, anodized aluminum. Our technical department will be happy to help you plan your balcony sliding and stacking wall.
Sliding glass wall - added value for the terrace and balcony
With a sliding glass wall, you can use your terrace, balcony or pergola not only during the summer months but all year round. The sliding glass wall is the perfect solution even in bad weather and can also be used as a windscreen. Your terrace is completely closed and you can enjoy an unobstructed view of your garden. Thanks to our clamping technology, glass processing is unnecessary and mounting is therefore considerably easier. The partition wall is also available as a stacking wall or as a foldable sliding wall.
Thanks to accessories such as partition posts, the partition walls can also be used on the go, for example as room dividers. Protect yourself and the glass with suitable glazing seals and prevent drafts on your terrace. Our glass clamping technology uses U-profiles and glass clamping profiles made of aluminum, which visually adapt to your balcony and terrace.
The advantages of sliding glass walls at a glance:
- All year-round usability of the terrace, balcony, pergola, etc.
- Practical protection against wind, rain and insects
- Optimal view through use of glass
- Different design variants for maximum flexibility
- Simple mounting due to clamping technology and easy handling
- Also suitable as a room divider