Self-supporting
Filtre
Drainage adapter for glass canopy, self-supporting Sophia Raine
Der Drainage-Adapter zum Anschluss von DN32 PVC-Rohren an das Glasvordach, freitragend Sophia.
Kunststoff
einfache Montage
zum Anschluss von DN32 PVC-Rohren
Glass canopy, self-supporting Sophia
Longueur:
5000 mm
|
Épaisseur du verre:
21,52 mm
SOPHIA is a frameless canopy system from G-Fittings that is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an extraordinary load capacity of up to 150 kilos per square metre.
The SOPHIA awning has a maximum projection of 130 cm. The maximum profile width is 500 cm. At this maximum width, the glass is divided into two to three separate panes, which makes installation easier.
SOPHIA contains a unique drainage system, which drains the rainwater on the side of the profile.
Optionally, you can turn your entrance into a real eye-catcher by equipping the wall clamp profile with our MARISHA LED flex strip set. This indirectly illuminates your roof and can also serve as orientation lighting without additional lighting. Choose between neutral, white light or RGB with color change.
If you are planning a very wide roof, then let our experts advise you without obligation.
Canopy complete set
Maximum projection of 130 cm
Wall clamp profile made of high-quality aluminum
Unique drainage system
Load capacity: 1.5 kN/m²
Various lengths available (Other dimensions on request.)
Optional LED lighting
Glass optionally available
Auvent en verre, autoportant Farah
Longueur:
coupé à la taille
|
Épaisseur du verre:
17,52 mm
The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®)
Easy mounting and concealed mounting
Up to 2 kN/m2 load capacity
Glass width up to 5000 mm
Easy mounting
For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available)
max. 1500 mm projection
No tie rods required
Glass tilt can be adjusted later
Several wall profiles can be connected
Sealing profile for glass Lara
Le profilé d'étanchéité universel LARA de G-Fittings, d'une largeur de 40 mm, sert à relier et à étancher deux vitres d'une épaisseur de 10,76 mm ou plus.
Pour la liaison et l'étanchéité des joints entre deux vitres.
Largeur totale 40 mm
Longueur 2500 mm
Pour verre 10,76-21,52 mm
10 mm entre les vitres (entretoise de 7 mm)
Couleur transparente
Matériau PVC
Très bonne résistance aux intempéries, au vieillissement, aux UV et à l'ozone
pas de colle spéciale nécessaire
Embout droit pour profilé de serrage mural Faria / Farida Fee
Our right-hand end cap FEE for aluminum wall clamping profiles is the perfect solution to finish off your wall installations in an elegant and functional way. This high quality end cap provides protection and gives your project a neat appearance.
Embout gauche pour profilé de serrage mural Faria / Farida Feebe
Our left running end cap FEEBE for aluminum wall clamping profiles is the perfect solution to finish your wall installations in an elegant and functional way. This high quality end cap provides protection and gives your project a neat appearance.
Embout droit pour auvent profilé au mur 1200 Florieke
The end cap right FLORIEKE for the Melania wall clip profile is a high-quality and functional solution for professional wall design. Made from hard-wearing plastic, it not only provides an aesthetic finish, but also protects the edge of the wall clip profile. The precise finish and attractive design blend seamlessly into any environment, giving the room a neat and modern appearance. Easy to install, this end cap provides a neat finish while preventing the ingress of dirt or moisture. Ideal for use in homes, offices or other commercial areas.