Barra de refuerzo
Filtro
Barra de refuerzo doble en forma de T para mamparas de ducha Kiana
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Stabilize your glass shower wall with this elegant and high quality stabilizer with T-bar KIANA. Suitable for any glass element with a thickness of 6-10 mm.
Stabilizer dimensions
Stainless steel tube diameter 19 mm
Total length 250 mm
Surface
Stainless steel
Chrome
Black
Juego de barra estabilizadora para montaje en pared 45° Tizzia
Longitud:
1000 mm
|
Superficie:
Diseño cromado, material de acero inoxidable
G-Fittings support rods for showers and glass shower screens are available in different lengths from 250 - 1250 mm and surfaces.
Suitable for glass thicknesses of 6 mm, 8 mm and 10 mm. The pipe diameter is Ø 19 mm and the wall connection is 45°. The length of the rod can be shortened individually.
Juego de barra estabilizadora para montaje en pared 90° Grietje
Longitud:
1000 mm
|
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The stabilizing rod set GRIETJE is designed for a 90° wall mounting.
The stabilizing rod fixes the glass pane with a grub screw. The stabilizing set is applied in the glass shower, but can also be used in other areas to stabilize a glass wall.
The stabilization rod set GRIETJE consists of a square tube in 20 x 20 mm and is offered in various lengths from 1000 mm to 1500 mm. The glass thickness is between 6 - 10 mm.
Designs
Stainless steel
Chrome
Black
Juego de barra estabilizadora para montaje en techo Alva
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The ALVA stabilization bar set for ceiling mounting is used to stabilize a glass pane, for example a glass shower.
The square tube measuring 20 x 20 mm is mounted on the ceiling with a length of 250 mm and stabilizes the glass pane when suspended with the Orlanda glass holder.
Choose a suitable design:
stainless steel
chrome
black
Juego de barra estabilizadora para montaje en pared 90° Elmina
Longitud:
1000 mm
|
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The ELMINA stabilizing rod set for 90° wall mounting is used to stabilize glass cubicles in the bathroom. The set is flexibly available in different lengths and surfaces and can therefore be adapted to your needs. The set consists of a closed glass holder, a wall flange and the tube with a diameter of 19 mm cut to the right length. Thanks to the glass holder, the glass does not need to be drilled, but is fixed with a grub screw. For example, hinged doors can be stabilized and the glass cabin does not have to be mounted on the ceiling and can be individually designed. The rod set is easy to maintain with a damp cloth.
Juego de barra estabilizadora para montaje en techo Teeta
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The G-Fittings TEETA stabilization bar set is designed for glass ceiling mounting. The set contains a 250 mm long stabilizing rod, a glass holder for 6 - 10 mm thick glass and a ceiling holder. Glass processing is not necessary.
Juego de barra estabilizadora para montaje en pared 45° Felicienne
Longitud:
250 mm
|
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The stabilizing bar set FELICIENNE is designed for 45° wall mounting.
A pane of glass is stabilized and secured by the stabilizing rod. A stabilization set is usually used in the glass shower, but can also be used in other areas to stabilize a glass wall.
The FELICIENNE stabilizing rod set consists of a square tube and is available in different lengths and for different glass thicknesses.
Designs
Stainless steel
Chrome
Black
Soporte de vidrio para tubo cuadrado de 20 x 20 mm Noeki
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Glass holder NOEKI for square tube with dimension 20 x 20 mm. The glass holder is available in four designs. Stainless steel design, chrome design, brass matte design and black design.
The glass is fixed with the grub screw in the glass holder. The holder is closed at the end.
Conector de tubo para tubo Ø 19,0 mm, variable Manuela
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Conector en T para barra estabilizadora Angelike
Superficie:
Diseño en acero inoxidable, material zamak
T-connector ANGELIKE for stabilizing rods in 19 mm diameter. The round tube is fixed with a grub screw.
Design
Stainless steel
Chrome
Black
Soporte de vidrio para tubo cuadrado de 20 x 20 mm, ajustable Heidelind
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Glass holder HEIDELIND für square tube with dimension 20 x 20 mm is flexible thanks to joint. The glass holder in stainless steel design, chrome design and black design is suitable for a glass thickness of 6 - 10 mm. The glass is fixed with a grub screw in the glass holder. The holder is closed at the end.
Soporte de vidrio abierto para tubo Ø 19,0 mm Chenna
Superficie:
Diseño en acero inoxidable, material zamak
The glass holder CHENNA is open and designed for Ø 19 mm tubes and rods. As part of a stabilization set, it is possible to stabilize the glass pane of the shower cubicle not only at the end, but also in the middle part, especially in larger glass showers. No drilling is necessary for the glass pane, as it is secured with a grub screw and the glass thickness can be selected variably.
Soporte de vidrio para tubo cuadrado de 20 x 20 mm, montaje en techo Orlanda
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Glass holder ORLANDA for square tube with dimension 20 x 20 mm for ceiling mounting. The glass holder in stainless steel design, chrome design and black design is suitable for a glass thickness of 6 - 10 mm. The glass is fixed with a screw in the glass holder.
Soporte de montaje 90° para tubo cuadrado 20 x 20 mm Erni
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Soporte de vidrio cerrado para tubo Ø 19,0 mm Maty
Superficie:
Diseño en acero inoxidable, material zamak
The MATY glass holder is closed on one side and designed for Ø 19 mm tubes and rods. It serves as the end of the stabilization set.
No drilling is necessary for the glass pane, as it is secured with a grub screw and the glass thickness can be selected variably.
Choose a suitable surface for the glass holder according to your shower cubicle and bathroom design:
stainless steel
chrome
Black
Soporte de montaje 45° para tubo Ø 19,0 mm Schauni
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The wall flange SCHAUNI is suitable for stabilizing bars. For connecting the stabilizing bar to the wall at an angle of 45° for glass showers and shower enclosures. For bars with a diameter of Ø 19 mm. The flange is available in stainless steel, chrome and black design.
Soporte de montaje 90° para tubo Ø 19,0 mm Aaffina
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The wall flange AAFFINA 90° for pipes with Ø 19.0 mm is part of our shower stall stabilizer sets.
The stainless steel flange is hidden from view after installation thanks to blind mounting, maintaining a clean look in your bathroom and shower stall.
In order not to interrupt the design in your bathroom, the wall bottle AAFFINA is available in different designs:
stainless steel
chrome
Black
Soporte de montaje 45° para tubo cuadrado 20 x 20 mm Aralia
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
Secure your square pipes with the wall flange 45° ARALIA in the dimension 20x20 mm. This high-quality wall flange, made of robust stainless steel, is available in three attractive surface variants: stainless steel, chrome and black.
With its subtle, timeless design, the wall flange blends seamlessly into a variety of environments, whether indoors or out. The 45-degree tilt adds dynamism to your project and opens up new design possibilities.
The concealed wall mounting not only provides a clean look, but also ensures a secure and reliable installation. Whether you're creating railings, handrails or other structures, this wall flange provides the stability and aesthetics you need.
Soporte de vidrio abierto para tubo cuadrado de 20 x 20 mm Marjetta
Superficie:
Diseño de acero inoxidable, material de acero inoxidable
The glass holder MARJETTA is suitable for square tubes with a dimension of 20 x 20 mm.
The glass is fixed with a grub screw.
Choose from three design options:
Stainless steel
Chrome
Black
Soporte de vidrio para tubo de Ø 19,0 mm, montaje en techo Alla
Superficie:
Diseño en acero inoxidable, material zamak
Glass holder ALLA for round tube with 19 mm Ø diameter for ceiling mounting. The glass holder is available in three designs. Stainless steel design, chrome design and black design.
The glass is fixed with the grub screw in the glass holder.
Barra de refuerzo
Stabilize your glass shower with a stabilizing bar. Secure the shower partition with a sturdy support, screwed tightly to your bathroom wall. This will prevent the side wall of your shower cubicle from swaying too much. Both as wall and ceiling mounting in chrome, stainless steel or anthracite black design.