Supports à verre
Filtre
Porte-verre ponctuel Ø 50 mm, ajustable Fiene
Hauteur:
30 mm
|
Surface:
Design en acier inoxydable, matériau en acier inoxydable
- Pour verre de 8 à 25,52 mm
- Ø 50 mm Support ponctuel
- M10 filet intérieur
- Acier inoxydable ou noir Design
- Pour l'intérieur et l'extérieur
Porte-verre à pointes Ø 50 mm Hannie
Hauteur:
30 mm
- Pour verre 8 - 25,52 mm
- Ø 50 mm, filetage M10
- Acier inoxydable V2A
- Polyvalent pour murs, balustrades, douches
- Montage simple et sûr
Porte-verre ponctuel, carré Janna
Hauteur:
10 mm
- Acier inoxydable V4A de haute qualité pour l'extérieur
- 58 x 58 mm forme carrée
- plaque de base 10 ou 30 mm
- Pour verre de 8 à 25,52 mm
- Résistant à la corrosion & longue durée de vie
Pince à verre Amarentia
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
- Pour montage mural, carré et sur tube
- Design semi-circulaire
- En acier inoxydable V2A ou en zamak
- Pour verre de 4 à 8,76 mm
- Goupille de sécurité en option
Pince à verre Aarnoudje
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
- Pour montage mural et sur tube
- En acier inoxydable V2A ou en zamak
- Convient pour le verre 4 - 8,76 mm
- Avec des caoutchoucs d'étanchéité interchangeables
- En cinq finitions élégantes
Pince à verre Sjanoek
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
- Pour montage mural, sur tube carré & rond
- Flexible pour le verre 4 - 10 mm
- Disponible en acier inoxydable V2A & zamak
- Différentes surfaces pour une diversité de designs
- Idéal pour les parois de protection & les séparations
Pince à verre Annemarijne
Connexion:
plat
The glass clamp Annemarijne is a square glass clamp with light wölbung. The clamp is in stainless steel design. In the connection type flat, the clamp is suitable for wall mounting or für a square tube. The glass clamp is also available in the connection type for pipes with a diameter of 48.3 mm to 50.8 mm.
The glass clamp is used for sneeze guard models, bottle shelves, partition walls and glass showers. Über the associated rubber inserts are determined the glassärke. The glass rubbers are available separately.
Pince à verre Nezha
Connexion:
plat
- Pince à verre de haute qualité
- Forme bombée semi-circulaire
- Montage à plat & circulaire
- Épaisseur du verre : 6 - 10 mm
- Différents designs de surface
Pince à verre Zenovia
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
- Pour montage mural, sur tube carré & rond
- Polyvalent pour cloisons & pare-haleine
- Convient pour Ø 25 - 30 mm & 38 - 42 mm
- Disponible en 5 finitions élégantes
- Fixation sûre du verre avec du caoutchouc de verre
Pince à verre Benine
Connexion:
plat
|
Matière:
Zamac
- Terminaison de tube avec prise de verre
- Fixation par vis sur la face inférieure
- Pour épaisseur de verre8 - 12,76 mm
- En zamak ou en acier inoxydable V4A
- Idéal pour les comptoirs, les cloisons, les étagères
Pince à verre Emely
Connexion:
plat
|
Matière:
Zamac
The glass clamp EMELY in stainless steel design is open on both sides and connects two glass panes in a 180° angle with each other.
The glass clamp made of V4A stainless steel is often used in salt water, swimming pools or the chemical industry.
With the matching rubber inserts, you determine the glass thickness for which the glass clamp is to be used.
Pince à verre Djoeke
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
- Pour des épaisseurs de verre de 6 à 12,76 mm
- montage au mur, sur tube carré ou rond
- Disponible pour les tubes Ø 38 - 42 & 48 - 50 mm
- Acier inoxydable V2A de haute qualité
- Insert en caoutchouc adapté disponible séparément
Pince à verre Celeste
- Acier inoxydable V4A pour une résistance maximale à la corrosion
- Ouvert des deux côtés - idéal comme connecteur de verre à 180
- Parfait pour les piscines, les côtes & l'industrie
- Epaisseurs de verre flexibles grâce aux inserts en caoutchouc
- Fixation sûre aux tuyaux
Porte-verre en acier inoxydable V4A Feike
- En acier inoxydable V4A - résistance maximale à la corrosion
- Idéal pour les piscines, les zones côtières & l'industrie
- Aspect discret en design inox
- Pour une utilisation en intérieur et en extérieur
- Utilisable de manière variable pour différentes épaisseurs de verre
Pince à verre Berta
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
- Pour montage mural, carré et sur tube
- Pour Ø 38 - 42 & 48 - 51 mm
- En acier inoxydable V2A ou en zamak
- Goupille de sécurité en option
- Pour des épaisseurs de verre de 6 à 10 mm
Support pour tablettes en verre Kora
Surface:
brut
|
Épaisseur du verre:
6 - 8 mm
The KORA glass plate support is ideal for use with shelves, cupboards and shelves. The carrier is also suitable in the counter area and for a frame. The semicircular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches. Available in chrome and stainless steel design.
Adaptateur Karlijn
Connexion:
plat
|
Matière:
Zamac
|
Surface:
Design en acier inoxydable, matériau zamac
The glass mounting adapter Karlijn makes it possible to attach a glass pane directly flat to a counter or any other mounting point. The glass requires a pre-drilled hole into which the clamp is inserted. The holder has a threaded screw with which it can be screwed to the counter and thus forms a direct connection between the counter and the glass pane.
A device that would have to be placed on or in front of the counter or table is no longer necessary. Suitable for glass thicknesses of 8-16 mm. Also available as an adapter for tubes of 38-42 mm or 48-50 mm.
Adaptateur Jella
Connexion:
plat
|
Matière:
Zamac
- Pour tubes de 38,1 - 42,4 mm & 48,3 - 50,8 mm
- Matériau : acier inoxydable V4A ou zamak
- Raccord plat pour porte-verre
- Résistant à la corrosion & robuste
- Convient pour une utilisation en intérieur et en extérieur
Support pour tablettes en verre avec cale caoutchouc Debra
Connexion:
plat
|
Longueur:
200 mm
|
Surface:
Design en acier inoxydable, matériau zamac
The glass plate support Debra is available as flat mount and tube mount. The carrier is ideal for shelves and similar installations. In tube assembly, the carrier is attached to the tube with a grub screw.
The carrier is available in a length of 200 or 300 mm.
Charnière Lucilla
Connexion:
plat
- adaptateur rotatif à 360
- Fixation sûre avec protection en caoutchouc
- Pour filetage M6
- Compatible avec les tubes plats et ronds
Embouts pour profilé d'étagère en verre Celine
The end caps for glass shelf profiles are made of plastic and have a gray - stainless steel design. Only available as a pair.
Support à verre Tibelda
Surface:
Design en acier inoxydable, matériau zamac
The TIBELDA glass holder in the shape of a cylinder is used for mounting and securing glass plates on flat surfaces. For example, the glass holder is screwed to a glass plate support and the glass pane is clamped in the holder.
No drilling is necessary for the glass pane, as it is secured with a grub screw. The glass thickness can be chosen from 6 - 10 mm. A rubber insert provides additional protection.
Support pour tablettes en verre Malu
Surface:
Design en acier inoxydable, matériau zamac
The free-floating MALU glass plate support supports glass plates with a maximum depth of 150 mm. Thanks to the bar, the leverage is better transferred to the wall and thus allows heavier loads. The glass plate support is mounted directly on the wall. This results in numerous applications, for example as a shelf or as a shelf in the bathroom.
The Malu carrier is suitable for glass thicknesses of 6 - 10 mm and is available in stainless steel or chrome.
Support pour tablettes en verre Franca
Surface:
Design en acier inoxydable, matériau zamac
The FRANCA glass plate support is ideal for use with shelves, cupboards and shelves. The rectangular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches.
Profilé en caoutchouc pour profilé d'étagère en verre, 5000 mm Elif
Épaisseur du verre:
8 mm
The rubber profile ELIF is used as an insert in the glass shelf profile, for example in our Henrietta glass shelf set. It ensures that the clamped glass pane does not slip and securely supports the shelf. The rubber profile is available for glass thicknesses of 8 mm and 10 mm.
Support pour tablettes en verre Grete
Surface:
Design en acier inoxydable, matériau zamac
|
Épaisseur du verre:
6 - 8 mm
- Demi-cercle
- Meilleure répartition du poids
- Jusqu'à 150 mm de profondeur
Support à verre Janouk
Longueur:
15 mm
|
Ø Diamètre:
16 mm
The glass holder JANOUK has an M6 thread for fixing the glass pane. This can be used in a thickness of 5 - 12 mm. The glass holder is available in different lengths from 15 mm to 102 mm and with a diameter of 16 mm to 40 mm. The glass holder made of stainless steel can be used, for example, as a clean finish for a sneeze guard model or a sneeze guard in the counter area.
Support pour tablettes en verre Viki
Surface:
Design en acier inoxydable, matériau zamac
|
Épaisseur du verre:
6 - 8 mm
- Des dimensions précises
- Design en acier inoxydable ou en chrome
- 6 - 8 mm ou 10 - 15 mm d'épaisseur de verre
- Facile à installer
Entretoise avec cabochon, tête fraisée Dewine
Glass holder DEWINE with countersunk head. The stainless steel glass holder has an M6 thread for the countersunk head, which holds the glass securely in position.
Butée Petrine
Connexion:
plat
|
Surface:
Design en acier inoxydable, matériau zamac
Will you choose the glass stop PETRINE flat or for tubes with diameters 25.4 mm to 30 mm or 38.1 mm to 42.4mm.For the surface you have the following choices
Stainless steel
brass
Chrome
Black