Glass supports
Glass point holder Ø 50 mm, adjustable Fiene
Height:
30 mm
|
Surface:
Stainless steel design, stainless steel material
The adjustable glass point holder FIENE made of V2A stainless steel is the perfect solution for the secure and permanent mounting of glass panels. The holder is made of high quality stainless steel and is suitable for indoor and outdoor use. The point holder has a diameter of 50 mm and can be used for glass plates with a thickness of 8 to 25.52 mm. The holder has an M10 thread that is compatible with a wide range of mounting screws.
Features:
Material: stainless steel V2A
Diameter: Ø 50 mm
Glass thickness: 8 - 25.52 mm
Thread: M10
Suitable for indoor and outdoor use
Available in stainless steel or black
Advantages:
High-quality workmanship
Longevity
Safety
Versatility
Easy assembly
Glass point holder Ø 50 mm Hannie
Height:
30 mm
The round glass point holder HANNIE made of V2A stainless steel is the perfect solution for the secure and permanent mounting of glass panels. The holder is made of high quality stainless steel and is suitable for indoor and outdoor use. The point holder has a diameter of 50 mm and can be used for glass plates with a thickness of 8 to 25.52 mm. The holder has an M10 thread that is compatible with a wide range of mounting screws.
Features:
Material: stainless steel V2A
Diameter: 50 mm
Glass thickness: 8 - 25.52 mm
Thread: M10
Suitable for indoor and outdoor
Advantages:
High quality workmanship
Longevity
Safety
Versatility
Easy assembly
Application areas:
Terrace canopies
Conservatories
Balconies
Stair railings
Glass walls
Showers
Swimming pools
Glass point holder, square Janna
Height:
10 mm
Our square glass point holder JANNA made of V4A stainless steel is the perfect solution for the secure and permanent mounting of glass panels. The holder is made of high quality stainless steel and is suitable for indoor and outdoor use. The point holder is available in two different sizes: with a base plate height of 10 mm or 30 mm. It can be used for glass plates with a thickness of 8 to 25.52 mm. The holder has an M10 thread that is compatible with a wide range of mounting screws.
Application areas:
Terrace enclosures
Winter gardens
Balconies
Stair railings
Glass walls
Showers
Swimming pools
Properties at a glance:
Material stainless steel V4A
matt brushed
square 58 x 58 mm
base plate height 10 mm or 30 mm
for 8 - 25.52 mm thick laminated/monolithic glass
with M10 thread
suitable for outdoor use
Glass wall shelf set Henrietta
Surface:
raw
Our glass shelf set HENRIETTA is the perfect solution to present your personal items in style and safety. With a length of 1000 mm, this set of glass shelf profile, rubber profile and end caps offers enough space for your favorite pieces. You can choose from two attractive finishes: raw or silver matte anodized.
Simple design: Henrietta's timeless design matches a variety of interior styles and adds a modern touch to your rooms.
Generous length: With a length of 1000 mm, this shelf provides ample space for books, decorations, or other items you want to display.
Bring an elegant touch to your home with this high quality shelving set.
Glass shelf support Kora
Glass thickness:
6 - 8 mm
|
Surface:
raw
The KORA glass plate support is ideal for use with shelves, cupboards and shelves. The carrier is also suitable in the counter area and for a frame. The semicircular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches. Available in chrome and stainless steel design.
Glass adapter Karlijn
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
The glass mounting adapter Karlijn makes it possible to attach a glass pane directly flat to a counter or any other mounting point. The glass requires a pre-drilled hole into which the clamp is inserted. The holder has a threaded screw with which it can be screwed to the counter and thus forms a direct connection between the counter and the glass pane.
A device that would have to be placed on or in front of the counter or table is no longer necessary. Suitable for glass thicknesses of 8-16 mm. Also available as an adapter for tubes of 38-42 mm or 48-50 mm.
Glass shelf support with rubber strip Debra
Connection:
flat
|
Length:
200 mm
|
Surface:
Stainless steel design, material zamak
The glass plate support Debra is available as flat mount and tube mount. The carrier is ideal for shelves and similar installations. In tube assembly, the carrier is attached to the tube with a grub screw.
The carrier is available in a length of 200 or 300 mm.
Endcaps for glass wall shelf profile Celine
The end caps for glass shelf profiles are made of plastic and have a gray - stainless steel design. Only available as a pair.
Glass support Tibelda
Surface:
Stainless steel design, material zamak
The TIBELDA glass holder in the shape of a cylinder is used for mounting and securing glass plates on flat surfaces. For example, the glass holder is screwed to a glass plate support and the glass pane is clamped in the holder.
No drilling is necessary for the glass pane, as it is secured with a grub screw. The glass thickness can be chosen from 6 - 10 mm. A rubber insert provides additional protection.
Glass shelf support Malu
Surface:
Stainless steel design, material zamak
The free-floating MALU glass plate support supports glass plates with a maximum depth of 150 mm. Thanks to the bar, the leverage is better transferred to the wall and thus allows heavier loads. The glass plate support is mounted directly on the wall. This results in numerous applications, for example as a shelf or as a shelf in the bathroom.
The Malu carrier is suitable for glass thicknesses of 6 - 10 mm and is available in stainless steel or chrome.
Glass shelf support Franca
Surface:
Stainless steel design, material zamak
The FRANCA glass plate support is ideal for use with shelves, cupboards and shelves. The rectangular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches.
Rubber profile for glass shelf profile, 5000 mm Elif
Glass thickness:
8 mm
The rubber profile ELIF is used as an insert in the glass shelf profile, for example in our Henrietta glass shelf set. It ensures that the clamped glass pane does not slip and securely supports the shelf. The rubber profile is available for glass thicknesses of 8 mm and 10 mm.
Glass shelf support Grete
Glass thickness:
6 - 8 mm
|
Surface:
Stainless steel design, material zamak
The semicircular glass shelf support Grete with a bridge allows a simple construction of a washbasin shelf or a wall shelf. Due to the bridge the contact surface is larger and the weight can better be distributed. We recommend glass plates up to a maximum depth of 150 mm. The glass holder is suitable for glass thicknesses of 6 - 8 mm or 10 - 15 mm and is available in stainless steel and chrome.
Glass wall shelf profile Gunnel
Length:
cut to size
|
Surface:
silver matt anodized
The glass shelving profile GUNNEL is the perfect solution for robust glass shelving. Available in a raw or silver matt anodized design, the profile is individually cut to size to meet your requirements. In addition to the profile, the customer will need the matching Celine end caps and Elif rubber profile to ensure a secure and aesthetically pleasing end solution. Both items are available as accessories.
Glass support Janouk
Length:
15 mm
|
Ø Diameter:
16 mm
The glass holder JANOUK has an M6 thread for fixing the glass pane. This can be used in a thickness of 5 - 12 mm. The glass holder is available in different lengths from 15 mm to 102 mm and with a diameter of 16 mm to 40 mm. The glass holder made of stainless steel can be used, for example, as a clean finish for a sneeze guard model or a sneeze guard in the counter area.
Glass shelf support Viki
Glass thickness:
6 - 8 mm
|
Surface:
Stainless steel design, material zamak
With its dimensions of 26 mm x 16 mm x 60 mm, the rectangular glass plate support VIKI is an elegant and functional highlight for your glass installations. Available in stainless steel or chrome, it perfectly matches your interior design style.
Choose between two glass thicknesses, 6-8 mm or 10-15 mm, to meet your individual requirements. The hassle-free installation and reliable stability make the glass panel support the best choice for your glass panels.
Glass support with sunken cap Dewine
Glass holder DEWINE with countersunk head. The stainless steel glass holder has an M6 thread for the countersunk head, which holds the glass securely in position.