Drainage adapter for glass canopy, self-supporting Sophia Raine
Der Drainage-Adapter zum Anschluss von DN32 PVC-Rohren an das Glasvordach, freitragend Sophia. Kunststoff einfache Montage zum Anschluss von DN32 PVC-Rohren
Glass canopy, self-supporting Sophia
Glass thickness: 21.52 mm | Length: 5000 mm
SOPHIA is a frameless canopy system from G-Fittings that is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an extraordinary load capacity of up to 150 kilos per square metre. The SOPHIA awning has a maximum projection of 130 cm. The maximum profile width is 500 cm. At this maximum width, the glass is divided into two to three separate panes, which makes installation easier. SOPHIA contains a unique drainage system, which drains the rainwater on the side of the profile. Optionally, you can turn your entrance into a real eye-catcher by equipping the wall clamp profile with our MARISHA LED flex strip set. This indirectly illuminates your roof and can also serve as orientation lighting without additional lighting. Choose between neutral, white light or RGB with color change. If you are planning a very wide roof, then let our experts advise you without obligation. Canopy complete set Maximum projection of 130 cm Wall clamp profile made of high-quality aluminum Unique drainage system Load capacity: 1.5 kN/m² Various lengths available (Other dimensions on request.) Optional LED lighting Glass optionally available
Glass canopy, self-supporting Farah
Glass thickness: 17.52 mm | Length: cut to size
The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®) Easy mounting and concealed mounting Up to 2 kN/m2 load capacity Glass width up to 5000 mm Easy mounting For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available) max. 1500 mm projection No tie rods required Glass tilt can be adjusted later Several wall profiles can be connected
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick. Connection and sealing of the butt joint of two panes of glass. Total width 40mm Length 2500 mm For 10,76-21,52 mm glass 10 mm between the glass panes (7 mm bridge) Color transparent Material PVC very good resistance to weathering, aging, UV and ozone no special glue needed
End cap right for wall clamping profile Faria / Farida Fee
Our right-hand end cap FEE for aluminum wall clamping profiles is the perfect solution to finish off your wall installations in an elegant and functional way. This high quality end cap provides protection and gives your project a neat appearance.
End cap left for wall clamp profile Faria / Farida Feebe
Our left running end cap FEEBE for aluminum wall clamping profiles is the perfect solution to finish your wall installations in an elegant and functional way. This high quality end cap provides protection and gives your project a neat appearance.
End cap right for canopy wall clamping profile 1200 Florieke
The end cap right FLORIEKE for the Melania wall clip profile is a high-quality and functional solution for professional wall design. Made from hard-wearing plastic, it not only provides an aesthetic finish, but also protects the edge of the wall clip profile. The precise finish and attractive design blend seamlessly into any environment, giving the room a neat and modern appearance. Easy to install, this end cap provides a neat finish while preventing the ingress of dirt or moisture. Ideal for use in homes, offices or other commercial areas.