Glass canopy, self-supporting Farah
Product number:
7729204225046
Description
The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®)
- Easy mounting and concealed mounting
- Up to 2 kN/m2 load capacity
- Glass width up to 5000 mm
- Easy mounting
- For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available)
- max. 1500 mm projection
- No tie rods required
- Glass tilt can be adjusted later
- Several wall profiles can be connected
Properties
| Adjustable tilt: | ± 3° |
|---|---|
| Depth profile: | 167 mm |
| Finish: | silver matt anodized |
| Glass: | SentryGlas® 25.52 mm |
| Glass cut outs: | yes |
| Glass included: | no |
| Glass thickness: | 25,52 mm (10 - 1,52 - 10 mm) |
| Height profile: | 149 mm |
| Load capacity: | 2 kN/m² |
| Material: | Aluminium |
| Mounting on: | Wall |
| Pre-drilled profile: | yes |
| Self-supporting: | yes |
| Width in mm: | 2500 mm |
| Width profile: | 2500 mm |
| max. projection: | 1500 mm |
Downloads
| Technical-report-G-Fittings®_Farah_ENG.pdf | Datasheet | 474.51 KB | |||
|---|---|---|---|---|---|
| Technical-report-G-Fittings®_Farah_DE.pdf | Datasheet | 474.49 KB | |||
| FARAH-2041-2042_profile-drill-pattern.pdf | Datasheet | 122.16 KB | |||
| 77-29-2042-xxx-46_manual_G-FITTINGS.pdf | Datasheet | 2.95 MB | |||
| 29-2041-xxx-46_2D.dxf | CAD file | 867.31 KB | dxf | ||
| 29-2041-FARAH_glass-canopy.dxf | CAD file | 3.65 MB | dxf |
9 variants available
Accessories
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick.
Connection and sealing of the butt joint of two panes of glass.
Total width 40mm
Length 2500 mm
For 10,76-21,52 mm glass
10 mm between the glass panes (7 mm bridge)
Color transparent
Material PVC
very good resistance to weathering, aging, UV and ozone
no special glue needed
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick.
Connection and sealing of the butt joint of two panes of glass.
Total width 40mm
Length 2500 mm
For 10,76-21,52 mm glass
10 mm between the glass panes (7 mm bridge)
Color transparent
Material PVC
very good resistance to weathering, aging, UV and ozone
no special glue needed