Canopies
Cantilevered glass canopy Nane
Length:
1500 mm
|
Surface:
raw
Protect your entrance area in a stylish and modern way with the self-supporting glass canopy NANE. This elegant and high-quality canopy not only offers optimum weather protection, but also adds an architectural highlight to your home.
Properties:
Modern design: The frameless yet elegant design blends seamlessly into any façade design and adds a touch of exclusivity to your home entrance.
High-quality materials: Made from rust-free aluminum, the NANE canopy not only offers aesthetic benefits, but also maximum stability and durability.
Freestanding construction: Thanks to the self-supporting construction without disruptive supports, the entrance area remains spacious and open.
Easy installation: The NANE canopy is supplied with detailed installation instructions. The pre-drilled holes and the supplied mounting material make installation quick and easy.
Versatile use: Whether for private entrances or commercial areas - the NANE glass canopy is versatile and enhances any entrance area.
Technical data:
Dimensions: W 1500 mm x H 80 mm x D 100 mm, W 3000 mm x H 80 mm x D 100 mm
Material: aluminum
Use with: Laminated safety glass (VSG) made of TVG glass 17.52 mm
Load capacity: Wind and snow load up to 3.8 kN/m2 (this corresponds to approx. 3.8 m new snow height with maximum projection and Sentry Glas®)
max. projection: 1200 mm
Colour silver matt anodized, raw
Advantages:
Optimal protection against rain and snow
RAL color as desired (optional)
High-quality and robust construction
LED lighting optionally available
Timeless and appealing design
Quick and easy installation
Easy to clean and weather-resistant
Scope of delivery:
1 piece. Wall clamping profile with seals
2 pcs. End caps
1 pc. Glass fastening set
1 pc. wrench for locking cams
End caps for self-supporting glass canopy Nane
Surface:
raw
The end caps for the wall clamping profile of the NANE glass canopy provide a clean, aesthetic finish to the side profile ends. They are supplied in a practical set of 2 and are installed by gluing, which ensures simple and secure fastening.
Seals for self-supporting glass canopy Nane
The seals for the glass canopy NANE are essential components for the secure fastening and stabilization of the glass panes. They are specially designed for glass thicknesses from 16.76 to 17.52 mm and ensure reliable fixing and protection of the glass surfaces. With their high-quality workmanship, they make a significant contribution to the durability and safety of your NANE glass canopy.
Drainage adapter for glass canopy, self-supporting Sophia Raine
The drainage adapter for connecting DN32 PVC pipes to the glass canopy, self-supporting Sophia.
Glass canopy with point holders Gilla
Our glass canopy with point holders and tubular supports GILLA is made of high quality V2A stainless steel and is the ideal solution to bring elegance and functionality to your entrance area. This stunning canopy is designed to not only provide protection from the elements, but also add a timeless design element to your entryway.
High-quality V2A stainless steel: The canopy is made of V2A stainless steel, which ensures excellent corrosion resistance and durability. As a result, your glass canopy will retain its flawless shine for many years to come.
Adjustable pipe supports: The pipe supports can be adjusted as needed to perfectly position and stabilize the canopy.
Point support system: The glass is held securely and elegantly by the point support system, which not only provides stability but also offers an aesthetically pleasing look.
Multiple Glass Thickness Compatibility: Our canopy is designed for glass panes from 10mm to 17.52mm, giving you the flexibility to choose the appropriate glass thickness for your needs.
Protection from the elements:This canopy provides protection from rain, snow and sunlight, keeping your entryway dry and secure.
Glass canopy, self-supporting Sophia
Glass thickness:
21.52 mm
|
Length:
5000 mm
Supported canopy
SOPHIA is a frameless canopy system from G-Fittings that is supported solely by a narrow wall profile. The combination of wall clamping profile and special glass ensures an extraordinary load-bearing capacity of up to 150 kilos per square meter for the self-supporting glass canopy.
The SOPHIA self-supporting glass canopy has a maximum projection of 130 cm. The maximum profile width is 500 cm. At this maximum width, the glass is distributed over two to three individual panes, making installation easier.
The self-supporting SOPHIA glass canopy features a unique drainage system that channels rainwater out of the side of the profile.
Optionally, you can turn your entrance area into a real eye-catcher by equipping the wall clamping profile with our LED flex strip set. This illuminates your canopy indirectly and can also serve as an orientation light without additional lights. Choose between neutral, white light or RGB with color change.
If you are planning a very wide canopy, let our experts advise you without obligation.
Canopy complete set
Maximum projection of 130 cm
Wall clamping profile made from high-quality aluminum
New drainage system
load capacity: 1.5 kN/m²
Various lengths available (other dimensions on request.)
Optional LED lighting
Glass optionally available
Glass canopy with point holders Dittie
A glass canopy with point brackets charmingly sets the scene for your entrance area.
The Dittie glass canopy with point brackets is supported by 6 point brackets made of stainless steel and stabilized by 2 additional rods, each of which connects 2 point brackets with each other. The glass canopy is firmly anchored at 4 points. The combination of point fixings and special glass enables an extremely high load of 2.51 kN/m².
The Aminata point fasteners for glass mounting are fixed in the glass by means of pre-drilling. Additional point holders are used for mounting on a load-bearing wall.
The angle of the glass canopy is slightly sloping at 93° so that water runs off to the front.
easy installation
for glass thickness: 10mm -17.52mm
up to 2.51 kN/m2 load capacity
individual dimensions possible
stainless steel design
maximum projection: 1300 mm
Glass canopy, self-supporting Farah
Glass thickness:
17.52 mm
|
Length:
cut to size
The self-supporting, frameless FARA awning system is only supported by a narrow wall profile. The combination of wall clamp profile and special glass ensures an exceptionally high load capacity of up to 200 kilos per square metre. The maximum projection is a maximum of 1500 mm (with 25.52 mm SentryGlas®)
Easy mounting and concealed mounting
Up to 2 kN/m2 load capacity
Glass width up to 5000 mm
Easy mounting
For glass thickness 17.52 mm, 21.52 mm and 25.52 mm SentryGlas® (optional available)
max. 1500 mm projection
No tie rods required
Glass tilt can be adjusted later
Several wall profiles can be connected
Sealing profile for glass Lara
The universal LARA sealing profile from G-Fittings with a width of 40 mm is used to connect and seal two panes of glass from 10.76 mm thick.
Connection and sealing of the butt joint of two panes of glass.
Total width 40mm
Length 2500 mm
For 10,76-21,52 mm glass
10 mm between the glass panes (7 mm bridge)
Color transparent
Material PVC
very good resistance to weathering, aging, UV and ozone
no special glue needed
Wall mounting plate Spijker
The SPIJKER wall mounting plate is a robust solution made of high-quality stainless steel, designed for mounting canopies to the wall using point fixings. With a diameter of 100 mm and a thickness of 6 mm, this plate provides a stable base for secure fastening.
Canopy point holder Renata
The point bracket for glass canopies RENATA offers a stable and flexible mounting solution for your canopy. Equipped with a movable tie rod joint, which is connected to the glass canopy via an M10 threaded rod, the point bracket allows the canopy to be individually adjusted. Installation is simple and secure using two screws in the wall. The stainless steel point bracket with tie rod joint not only ensures secure installation, but also allows you to position the canopy as you wish.
Canopy point holder Aminata
The glass canopy point bracket AMINATA offers a stable and flexible mounting solution for your canopy. Equipped with a movable tie rod joint, which is connected to the building wall via an M10 threaded rod, the point bracket allows the canopy to be individually adjusted. The point bracket is securely mounted to the glass canopy using a 58 mm glass plate holder. The point bracket with stainless steel tie rod joint not only ensures secure installation, but also offers the option of positioning the canopy as you wish.
Canopy point fixing holder Lieke
The LIEKE glass canopy point holder is characterized by its movable articulated arm with glass holder. It is easy and secure to install using two screws in the wall. The point bracket with stainless steel joint not only ensures secure installation, but also allows you to position the canopy as you wish.
Rod with thread M10 left/right Dyonne
Length:
830 mm
The rod with M10 thread left/right DYONNE is made of stainless steel. It is available in standard lengths of 830 mm or can be cut to individual dimensions. This versatile rod offers reliable threaded connections and is ideal for various applications.
Glass canopy with swords Zachary
The glass canopy with heavy-duty supports ZACHARY offers a modern and elegant solution for the entrance area. Made of high-quality V2A stainless steel in a stainless steel design, it not only guarantees an appealing aesthetic, but also durability and weather resistance. Held in place with two robust heavy-duty supports, the canopy allows a maximum projection of 1000 mm, offering flexibility in the design of the entrance area. It is compatible with glass thicknesses of 12, 12.76, 16.76 or 17.76mm and is fixed at a 93° angle to the wall to ensure that water effectively drains away from the front edge of the canopy.
GLASS CANOPIES FOR STYLISH ENTRANCES
Glass canopies are not only functional elements for protecting the entrance to a house from the weather, but also aesthetic design elements that enhance the entrance area of a house. These modern canopies not only offer protection from rain, snow and sunlight, but also create an inviting atmosphere and give the entrance area an elegant touch.
GLASS CANOPY FOR FRONT DOOR
A glass canopy over the front door is an attractive option for protecting the front entrance while enhancing the architectural appearance. By using high quality glass and robust brackets, a canopy at the front entrance can provide a durable solution for weather protection without sacrificing aesthetics.
Glass canopies are a popular choice for modern architecture and offer a variety of design options. From transparent glass canopies to frosted or tinted glass, different designs and materials can be used to suit the individual requirements and style of the home.
WHICH GLASS SHOULD BE USED FOR A CANOPY?
Safety glass types such as toughened safety glass (ESG) or laminated safety glass (VSG) are generally used for a canopy. These types of glass are particularly resistant to external influences and offer a high level of safety, as they break into small, blunt pieces when broken, thus minimizing the risk of injury.
HOW DO YOU CLEAN A GLASS CANOPY?
Cleaning a glass canopy can be easy, but requires regular maintenance to maintain transparency and aesthetics. To remove dirt and dust, the glass can be wiped with a mild detergent and a soft cloth. For stubborn stains, water with a little vinegar can also be used. It is important not to use abrasive materials or harsh cleaning agents to avoid scratching the glass surface. Regular cleaning helps to maintain the service life and visual appearance of the glass canopy.