Glass supports
Filter products
Adjustable glass point holder Ø 50 mm Fiene
Height:
30 mm
|
Surface:
Stainless steel design, stainless steel material
- For 8 - 25.52 mm glass
- Ø 50 mm point holder
- M10 internal thread
- Stainless steel or black design
- For indoor and outdoor use
Glass point holder Ø 50 mm Hannie
Height:
30 mm
- For glass 8 - 25.52 mm
- Ø 50 mm, M10 thread
- V2A stainless steel
- Versatile for walls, railings, showers
- Simple and safe installation
Glass point holder, square Janna
Height:
10 mm
- High-quality V4A stainless steel for outdoor use
- 58 x 58 mm square shape
- Base plate 10 or 30 mm
- For 8 - 25.52 mm glass
- Corrosion-resistant & durable
Glass clamp Amarentia
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
- For wall, square & pipe mounting
- Semicircular design
- In V2A stainless steel or zamak
- For 4 - 8.76 mm glass
- Locking pin optional
Glass clamp Aarnoudje
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
- For wall & pipe mounting
- Made of stainless steel V2A or zamak
- Suitable for glass 4 - 8.76 mm
- With replaceable rubber seals
- In five stylish finishes
Glass clamp Sjanoek
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
- For wall, square & round tube mounting
- Flexible for glass 4 - 10 mm
- Available in stainless steel V2A & zamak
- Different surfaces for design variety
- Ideal for protective walls & partitions
Glass clamp Annemarijne
Connection:
flat
The glass clamp Annemarijne is a square glass clamp with light wölbung. The clamp is in stainless steel design. In the connection type flat, the clamp is suitable for wall mounting or für a square tube. The glass clamp is also available in the connection type for pipes with a diameter of 48.3 mm to 50.8 mm.
The glass clamp is used for sneeze guard models, bottle shelves, partition walls and glass showers. Über the associated rubber inserts are determined the glassärke. The glass rubbers are available separately.
Glass clamp Nezha
Connection:
flat
- High-quality glass clamp
- Semicircular curved shape
- Flat & round mounting
- Glass thickness: 6 - 10 mm
- Various surface designs
Glass clamp Zenovia
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
- For wall, square & round tube mounting
- Versatile for partition walls & sneeze guards
- Suitable for Ø 25 - 30 mm & 38 - 42 mm
- Available in 5 elegant finishes
- Secure glass fixation with glass rubber
Glass clamp Benine
Connection:
flat
|
Material:
Zamac
- Pipe end with glass holder
- Screw fastening on the underside
- For glass thicknesses8 - 12.76 mm
- In zamak or V4A stainless steel
- Ideal for counters, partitions, shelves
Glass clamp Emely
Connection:
flat
|
Material:
Zamac
The glass clamp EMELY in stainless steel design is open on both sides and connects two glass panes in a 180° angle with each other.
The glass clamp made of V4A stainless steel is often used in salt water, swimming pools or the chemical industry.
With the matching rubber inserts, you determine the glass thickness for which the glass clamp is to be used.
Glass clamp Djoeke
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
- For glass thicknesses from 6 - 12.76 mm
- Mounting on wall, square or round tube
- Available for pipe Ø 38 - 42 & 48 - 50 mm
- High-quality V2A stainless steel
- Matching rubber insert available separately
Glass clamp Celeste
- V4A stainless steel for maximum corrosion resistance
- Open on both sides - ideal as a 180° glass connector
- Perfect for swimming pools, coasts & industry
- Flexible glass thicknesses thanks to rubber inserts
- Secure attachment to pipes
Glass clamp Feike
- Made of V4A stainless steel - maximum corrosion resistance
- Ideal for swimming pools, coastal areas & industry
- Discreet look in stainless steel design
- For indoor and outdoor use
- Can be used variably for different glass thicknesses
Glass clamp Berta
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
- For wall, square & pipe mounting
- For Ø 38 - 42 & 48 - 51 mm
- In V2A stainless steel or zamak
- Optionally with locking pin
- For glass thicknesses 6 - 10 mm
Glass shelf support Kora
Glass thickness:
6 - 8 mm
|
Surface:
raw
The KORA glass plate support is ideal for use with shelves, cupboards and shelves. The carrier is also suitable in the counter area and for a frame. The semicircular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches. Available in chrome and stainless steel design.
Glass adapter Karlijn
Connection:
flat
|
Material:
Zamac
|
Surface:
Stainless steel design, material zamak
The glass mounting adapter Karlijn makes it possible to attach a glass pane directly flat to a counter or any other mounting point. The glass requires a pre-drilled hole into which the clamp is inserted. The holder has a threaded screw with which it can be screwed to the counter and thus forms a direct connection between the counter and the glass pane.
A device that would have to be placed on or in front of the counter or table is no longer necessary. Suitable for glass thicknesses of 8-16 mm. Also available as an adapter for tubes of 38-42 mm or 48-50 mm.
Adapter Jella
Connection:
flat
|
Material:
Zamac
- For 38.1 - 42.4 mm & 48.3 - 50.8 mm pipes
- Material: V4A stainless steel or zamak
- Flat connection for glass holder
- Corrosion-resistant & robust
- Suitable for indoor & outdoor use
Glass shelf support with rubber strip Debra
Connection:
flat
|
Length:
200 mm
|
Surface:
Stainless steel design, material zamak
The glass plate support Debra is available as flat mount and tube mount. The carrier is ideal for shelves and similar installations. In tube assembly, the carrier is attached to the tube with a grub screw.
The carrier is available in a length of 200 or 300 mm.
Hinge adapter Lucilla
Connection:
flat
- 360° rotatable adapter
- Secure fixation with rubber protection
- For M6 thread
- Compatible with flat and round pipes
Endcaps for glass wall shelf profile Celine
The end caps for glass shelf profiles are made of plastic and have a gray - stainless steel design. Only available as a pair.
Glass support Tibelda
Surface:
Stainless steel design, material zamak
The TIBELDA glass holder in the shape of a cylinder is used for mounting and securing glass plates on flat surfaces. For example, the glass holder is screwed to a glass plate support and the glass pane is clamped in the holder.
No drilling is necessary for the glass pane, as it is secured with a grub screw. The glass thickness can be chosen from 6 - 10 mm. A rubber insert provides additional protection.
Glass shelf support Malu
Surface:
Stainless steel design, material zamak
The free-floating MALU glass plate support supports glass plates with a maximum depth of 150 mm. Thanks to the bar, the leverage is better transferred to the wall and thus allows heavier loads. The glass plate support is mounted directly on the wall. This results in numerous applications, for example as a shelf or as a shelf in the bathroom.
The Malu carrier is suitable for glass thicknesses of 6 - 10 mm and is available in stainless steel or chrome.
Glass shelf support Franca
Surface:
Stainless steel design, material zamak
The FRANCA glass plate support is ideal for use with shelves, cupboards and shelves. The rectangular glass holder is screwed into the cupboard or shelf wall and the glass plate is clamped into the support. The simple assembly allows a quick application and the glass plate does not require a hole for attachment and is fixed with a grub screw. A rubber insert protects the glass plate from slipping and scratches.
Rubber profile for glass shelf profile, 5000 mm Elif
Glass thickness:
8 mm
The rubber profile ELIF is used as an insert in the glass shelf profile, for example in our Henrietta glass shelf set. It ensures that the clamped glass pane does not slip and securely supports the shelf. The rubber profile is available for glass thicknesses of 8 mm and 10 mm.
Glass shelf support Grete
Glass thickness:
6 - 8 mm
|
Surface:
Stainless steel design, material zamak
- Semicircular
- Better weight distribution
- Up to 150 mm depth
Glass support Janouk
Length:
15 mm
|
Ø Diameter:
16 mm
The glass holder JANOUK has an M6 thread for fixing the glass pane. This can be used in a thickness of 5 - 12 mm. The glass holder is available in different lengths from 15 mm to 102 mm and with a diameter of 16 mm to 40 mm. The glass holder made of stainless steel can be used, for example, as a clean finish for a sneeze guard model or a sneeze guard in the counter area.
Glass shelf support Viki
Glass thickness:
6 - 8 mm
|
Surface:
Stainless steel design, material zamak
- Precise dimensions
- Stainless steel or chrome design
- 6 - 8 mm or 10 - 15 mm glass thickness
- Simple installation
Glass support with sunken cap Dewine
Glass holder DEWINE with countersunk head. The stainless steel glass holder has an M6 thread for the countersunk head, which holds the glass securely in position.
Stop adapter Petrine
Connection:
flat
|
Surface:
Stainless steel design, material zamak
Will you choose the glass stop PETRINE flat or for tubes with diameters 25.4 mm to 30 mm or 38.1 mm to 42.4mm.For the surface you have the following choices
Stainless steel
brass
Chrome
Black