Free shipping
Shipping within 24h
Competent advice
Purchase comfortable on invoice
+44 (0)1782 491 030

Mirror systems

Filter
Mirror profile Anle
Length: 5000 mm | Surface: silver matt anodized

To order this product, please log in here.

Mirror mounting set Anoeshka
Surface: Chrome design

To order this product, please log in here.

Mirror profile Siri
Length: cut to size

To order this product, please log in here.

Mirror adhesive OttoColl S 16 Hamke
310 ml

To order this product, please log in here.

End cap left for mirror rail 5535 Fea

To order this product, please log in here.

Mountingspacer for mirror profile 5535 Alphie
100 pieces, wood black, 80 x 8 x 6 mm

To order this product, please log in here.

Spacers Pasqualina

To order this product, please log in here.

Mirror clips Bambi
Das Spiegelklammer-Set BAMBI von G-Fittings dient zur einfachen Anbringung von Spiegeln, Bildern und Schildern. Das Set besteht aus zwei feststehenden Klammern und zwei Klammern mit Federn und Korkeinlage. Nach der Befestigung am Spiegel drückt man die Federn mit der Spiegelkante nach unten und führt sie oben in die feststehenden Klammern ein. Das Set ist für eine Glasstärke von 4 - 6 mm und max. 12 kg geeignet. Tipp: Achten Sie darauf, dass der Spiegel erst in die unteren Halter eingehängt wird und anschließend mithilfe des Federzuges der oberen Halter fixiert wird. Lieferumfang 2 Oberteile mit Federmechanismus 2 Unterteile 4 Schrauben 4 Dübeln

To order this product, please log in here.

Wood screws with inner thread Aloysia

To order this product, please log in here.

Mirror screws Myronne
Surface: Stainless steel design, material zamak | Ø Diameter: 16 mm

To order this product, please log in here.

Mirror demisting pad Kjersti
Dimensions: 150 x 200 mm
The G-Fittings mirror heating is simply glued to the back of the mirror. Fine heating wires in the foil ensure that the mirror is heated up to 28 ° C in 3 - 5 minutes. The connection is simple and can be made to the existing bathroom lighting or via a separate switch (not included). Have the electrical connection carried out by a specialist only. A transformer is not necessary. When switched on, the mirror is heated and remains clear. It is TÜV and type tested, has the CE marking and can be connected directly to 220 - 230V. The connection cable is approx. 1 meter long.Installation:The mirror heaters are only intended for glass mirrors. Make sure the mirror is bigger compared to the mirror heater. Remove the adhesive backing from the mirror heater and mount it directly on the back of the mirror to avoid the formation of air bubbles or wrinkles. Do not mount the mirror on or near metal surfaces such as aluminum, stainless steel, etc. When attaching the mirror to the wall with the adhesive, apply the adhesive along the edge of the mirror (minimum 40mm clearance between the panel and the mirror edge). Do not apply glue to the mirror heater. The mirror heating must not be shortened and replaced. The cabling must be connected in accordance with IEE regulations.

To order this product, please log in here.

Mirror fixation kit Mine
max. Mirror size: 0.8 m²

To order this product, please log in here.

PE Mirror adhesive tape Ailis
Length: 5 m

To order this product, please log in here.